TDA8566_15 Datasheet, PDF(1/21 Page) NXP Semiconductors – 2X40 W/2 W stereo BTL car radio power amplifier with differential inputs and diagnostic outputs

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

TDA8566_15 Datasheet, PDF (1/21 Pages) NXP Semiconductors – 2X40 W/2 W stereo BTL car radio power amplifier with differential inputs and diagnostic outputs

TDA8566

2 Ã 40 W/2 â¦ stereo BTL car radio power ampliï¬er with

differential inputs and diagnostic outputs

Rev. 06 â 15 October 2007

Product data sheet

1. General description

The TDA8566 is an integrated class-B output ampliï¬er which is available in several

packages. TDA8566TH is contained in a 20-lead small outline plastic package. The

TDA8566TH1 is a 24-lead small outline plastic package which is pin compatible with the

I2C-bus controlled ampliï¬er TDA1566TH for one board layout. TDA8566Q is a 17-pin

DIL-bent-SIL package.

The device contains 2 ampliï¬ers in a Bridge-Tied Load (BTL) conï¬guration. The output

power is 2 Ã 25 W in a 4 â¦ load or 2 Ã 40 W in a 2 â¦ load. It has a differential input stage

and 2 diagnostic outputs. The device is primarily developed for car radio applications.

2. Features

I Differential inputs

I Very high Common Mode Rejection Ratio (CMRR)

I High common mode input signal handling

I Requires very few external components

I High output power

I 4 â¦ and 2 â¦ load driving capability

I Low offset voltage at output

I Fixed gain

I Diagnostic facility (distortion, short-circuit and temperature pre-warning)

I Good ripple rejection

I Mode select switch (operating, mute and standby)

I Load dump protection

I Short-circuit proof to ground, to VP and across the load

I Low power dissipation in any short-circuit condition

I Thermally protected

I Reverse polarity safe

I Protected against electrostatic discharge

I No switch-on/switch-off plops

I Low thermal resistance

I TDA8566TH1 is pin compatible with TDA1566TH

▷