|
TDA8385 Datasheet, PDF (1/21 Pages) NXP Semiconductors – Control circuit for a Self-Oscillating Power Supply SOPS | |||
|
Philips Semiconductors
Control circuit for a Self-Oscillating
Power Supply (SOPS)
Preliminary speciï¬cation
TDA8385
FEATURES
⢠Bandgap reference generator
⢠Slow-start circuitry
⢠Low-loss peak current sensing
⢠Over-voltage protection
⢠Hysteresis controlled stand-by
function
⢠Error amplifier with gain setting
⢠Programmable transfer character
generator
⢠Protection against open- and
short-circuited feedback loop
⢠Over-load current fold back
characteristic
⢠LED driver
⢠Demagnetization protection
⢠Programmable determination of
switch-on moment of switching
transistor for low-switching losses
⢠Feed-forward input
⢠Regulation-indicator output
⢠Programmable minimum on-time of
switching transistor
⢠Accurate peak-current setting.
GENERAL DESCRIPTION
The TDA8385 is intended to be used
in combination with the opto-coupler
(CNR50) as a control unit for a
self-oscillating power supply.
ORDERING INFORMATION
EXTENDED TYPE
NUMBER
TDA8385
PINS
16
PIN POSITION
DIL
PACKAGE
MATERIAL
plastic
CODE
SOT38WBE
March 1994
2
|
▷ |