SC16C750B Datasheet, PDF (1/44 Pages) NXP Semiconductors – 5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs

SC16C750B
5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs
Rev. 03 — 13 December 2004
Product data
1. General description
The SC16C750B is a Universal Asynchronous Receiver and Transmitter (UART)
used for serial data communications. Its principal function is to convert parallel data
into serial data, and vice versa. The UART can handle serial data rates up to 3 Mbit/s.
The SC16C750B is pin compatible with the TL16C750 and it will power-up to be
functionally equivalent to the 16C450. Programming of control registers enables the
added features of the SC16C750B. Some of these added features are the 64-byte
receive and transmit FIFOs, automatic hardware flow control. The selectable
auto-flow control feature significantly reduces software overload and increases
system efficiency while in FIFO mode by automatically controlling serial data flow
using RTS output and CTS input signals. The SC16C750B also provides DMA mode
data transfers through FIFO trigger levels and the TXRDY and RXRDY signals.
On-board status registers provide the user with error indications, operational status,
and modem interface control. System interrupts may be tailored to meet user
requirements. An internal loop-back capability allows on-board diagnostics.
The SC16C750B operates at 5 V, 3.3 V and 2.5 V, the industrial temperature range
and is available in plastic PLCC44, LQFP64, and HVQFN32 packages.
2. Features
s Single channel
s 5 V, 3.3 V and 2.5 V operation
s 5 V tolerant inputs
s Industrial temperature range (−40 °C to +85 °C)
s After reset, all registers are identical to the typical 16C450 register set
s Capable of running with all existing generic 16C450 software
s Pin compatibility with the industry-standard ST16C450/550, TL16C450/550,
PC16C450/550. Software compatible with SC16C750 and TL16C750
s Up to 3 Mbit/s transmit/receive operation at 5 V, 2 Mbit/s at 3.3 V, and 1 Mbit/s at
2.5 V
s 64 byte transmit FIFO
s 64 byte receive FIFO with error flags
s Programmable auto-RTS and auto-CTS
x In auto-CTS mode, CTS controls transmitter
x In auto-RTS mode, RxFIFO contents and threshold control RTS
s Automatic hardware flow control
s Software selectable Baud Rate Generator
s Four selectable Receive interrupt trigger levels