PCF85103C-2 Datasheet, PDF (1/20 Pages) NXP Semiconductors – 256 x 8-bit CMOS EEPROM with I2C-bus interface

PCF85103C-2
256 × 8-bit CMOS EEPROM with I²C-bus interface
Rev. 02 — 09 May 2002
Product data
1. Description
The PCF85103C-2 is a floating gate Electrically Erasable Programmable Read Only
Memory (EEPROM) with 2 kbits (256 × 8-bit) non-volatile storage. By using an
internal redundant storage code, it is fault tolerant to single bit errors. This feature
dramatically increases the reliability compared to conventional EEPROMs. Power
consumption is low due to the full CMOS technology used. The programming voltage
is generated on-chip, using a voltage multiplier.
Data bytes are received and transmitted via the serial I²C-bus. Up to eight
PCF85103C-2 devices may be connected to the I²C-bus. Chip select is accomplished
by three address inputs (A0, A1 and A2).
The PCF85103C-2 is identical to PCF85102C-2 except for the fixed I²C address,
allowing up to eight PCF85102C-2 and eight PCF85103C-2 on the same I²C-bus.
2. Features
s Low power CMOS:
x 2.0 mA maximum operating current
x maximum standby current 10 µA (at 6.0 V), typical 4 µA
s Non-volatile storage of 2 kbits organized as 256 × 8-bit
s Single supply with full operation down to 2.5 V
s On-chip voltage multiplier
s Serial input/output I²C-bus
s Write operations:
x byte write mode
x 8-byte page write mode (minimizes total write time per byte)
s Read operations:
x sequential read
x random read
s Internal timer for writing (no external components)
s Internal power-on reset
s 0 to 100 kHz clock frequency
s High reliability by using a redundant storage code
s Endurance: 1,000,000 Erase/Write (E/W) cycles at T_amb = 22 °C
s 10 years non-volatile data retention time
s Pin compatible to: PCF8570, PCF8571, PCF8572, PCA8581, PCF8582, and
PCF85102