NX5P2925C Datasheet, PDF (1/20 Pages) NXP Semiconductors – Logic controlled high-side power switch

NX5P2925C
Logic controlled high-side power switch
Rev. 1 — 7 July 2015
Product data sheet
1. General description
The NX5P2925C is a high-side load switch which features a low ON resistance N-channel
MOSFET with controlled slew rate that supports 2.5 A of continuous current. Designed for
operation from 0.8 V to 5.5 V, it is used in power domain isolation applications to reduce
power dissipation and extend battery life. The enable logic includes integrated logic level
translation making the device compatible with lower voltage processors and controllers.
The NX5P2925C is ideal for portable, battery operated applications due to low ground
current.
NX5P2925C features reverse current protection (RCP) circuits. If VOUT exceeds VIN by
25 mV, the RCP circuit isolates VOUT from VIN, preventing damage to devices on the
input side of the switch.
2. Features and benefits
 Wide supply voltage range from 0.8 V to 5.5 V
 Very low ON resistance:
 18 m (typical) at a supply voltage of 1.2 V
 18 m (typical) at a supply voltage of 1.8 V
 High noise immunity
 High current handling capability (2.5 A continuous current)
 Reverse current protection
 Turn-on slew rate limiting
 ESD protection:
 HBM JESD22-A114F Class 3A exceeds 5000 V
 CDM AEC-Q100-011 revision B exceeds 1000 V
 Specified from 40 C to +85 C
3. Applications
 Cell phone
 Digital cameras and audio devices
 Portable and battery-powered equipment