NX3P191_15 Datasheet, PDF (1/15 Pages) NXP Semiconductors – Logic controlled high-side power switch

NX3P191
Logic controlled high-side power switch
Rev. 5 — 14 January 2014
Product data sheet
1. General description
The NX3P191 is a high-side load switch which features a low ON resistance P-channel
MOSFET. It has input inrush current reduction that supports more than 500 mA of
continuous current. It also has an integrated output discharge resistor to discharge the
output capacitance when disabled. Designed for operation from 1.1 V to 3.6 V, it is used in
power domain isolation applications to reduce power dissipation and extend battery life.
The enable logic includes integrated logic level translation making the device compatible
with lower voltage processors and controllers. The NX3P191 is ideal for portable, battery
operated applications due to low ground current and ultra-low shutdown current.
2. Features and benefits
 Wide supply voltage range from 1.1 V to 3.6 V
 Very low ON resistance:
 95 m (typical) at a supply voltage of 1.8 V
 High noise immunity
 Low-power mode when EN is LOW
 Low ground current (2 A maximum)
 1.2 V control logic at a supply voltage of 3.6 V
 High current handling capability (500 mA continuous current)
 Internal output discharge resistor
 Turn-on slew rate limiting
 ESD protection:
 HBM JESD22-A114F Class 3A exceeds 4000 V
 CDM AEC-Q100-011 revision B exceeds 500 V
 Specified from 40 C to +85 C
3. Applications
 Cell phone
 Digital cameras and audio devices
 Portable and battery-powered equipment