NX3L2267S_15 Datasheet, PDF (1/20 Pages) NXP Semiconductors – Low-ohmic dual single-pole double-throw analog switch

NX3L2267S
Low-ohmic dual single-pole double-throw analog switch
Rev. 2 — 8 November 2011
Product data sheet
1. General description
The NX3L2267S is a dual low-ohmic single-pole double-throw analog switch suitable for
use as an analog or digital 2 : 1 multiplexer/demultiplexer. Each switch has a digital select
input (nS), two independent inputs/outputs (nY0 and nY1) and a common input/output
(nZ).
The NX3L2267S includes termination resistors that improve noise immunity during
overshoot excursions, off-isolation coupling, or pop-minimization.
Schmitt trigger action at the digital inputs makes the circuit tolerant to slower input rise and
fall times. Low threshold digital inputs allows this device to be driven by 1.8 V logic levels
in 3.3 V applications without significant increase in supply current I_CC. This makes it
possible for the NX3L2267S to switch 4.3 V signals with a 1.8 V digital controller,
eliminating the need for logic level translation. The NX3L2267S allows signals with
amplitude up to V_CC to be transmitted from nZ to nY0 or nY1, or from nY0 or nY1 to nZ. Its
low ON resistance (0.5 ) and flatness (0.13 ) ensures minimal attenuation and
distortion of transmitted signals.
2. Features and benefits
 Wide supply voltage range from 1.4 V to 4.3 V
 Very low ON resistance (peak):
 1.65  (typical) at V_CC = 1.4 V
 0.95  (typical) at V_CC = 1.65 V
 0.55  (typical) at V_CC = 2.3 V
 0.50  (typical) at V_CC = 2.7 V
0.50  (typical) at V_CC = 4.3 V
 Break-before-make switching
 High noise immunity
 ESD protection:
 HBM JESD22-A114F Class 3A exceeds 7500 V
 MM JESD22-A115-A exceeds 200 V
 CDM AEC-Q100-011 revision B exceeds 1000 V
 CMOS low-power consumption
 Latch-up performance exceeds 100 mA per JESD78B Class II Level A
 1.8 V control logic at V_CC = 3.6 V
 Control input accepts voltages above supply voltage
 Very low supply current, even when input is below V_CC
 High current handling capability (350 mA continuous current under 3.3 V supply)