NX3L1G53_15 Datasheet, PDF (1/24 Pages) NXP Semiconductors – Low-ohmic single-pole double-throw analog switch

NX3L1G53
Low-ohmic single-pole double-throw analog switch
Rev. 7 — 8 February 2013
Product data sheet
1. General description
The NX3L1G53 is a low-ohmic single-pole double-throw analog switch suitable for use as
an analog or digital 2:1 multiplexer/demultiplexer. It has a digital select input (S), two
independent inputs/outputs (Y0 and Y1), a common input/output (Z) and an active LOW
enable input (E). When pin E is HIGH, the switch is turned off. Schmitt trigger action at the
digital inputs makes the circuit tolerant to slower input rise and fall times.
The NX3L1G53 allows signals with amplitude up to V_CC to be transmitted from Z to Y0 or
Y1; or from Y0 or Y1 to Z. Its low ON resistance (0.5 ) and flatness (0.13 ) ensures
minimal attenuation and distortion of transmitted signals.
2. Features and benefits
 Wide supply voltage range from 1.4 V to 4.3 V
 Very low ON resistance (peak):
 1.6  (typical) at V_CC = 1.4 V
 1.0  (typical) at V_CC = 1.65 V
 0.55  (typical) at V_CC = 2.3 V
 0.50  (typical) at V_CC = 2.7 V
 0.50  (typical) at V_CC = 4.3 V
 Break-before-make switching
 High noise immunity
 ESD protection:
 HBM JESD22-A114F Class 3A exceeds 7500 V
 MM JESD22-A115-A exceeds 200 V
 CDM AEC-Q100-011 revision B exceeds 1000 V
 IEC61000-4-2 contact discharge exceeds 8000 V for switch ports
 CMOS low-power consumption
 Latch-up performance exceeds 100 mA per JESD 78 Class II Level A
 Direct interface with TTL levels at 3.0 V
 Control input accepts voltages above supply voltage
 High current handling capability (350 mA continuous current under 3.3 V supply)
 Specified from 40 C to +85 C and from 40 C to +125 C