NX3L1G384_15 Datasheet, PDF(1/18 Page) NXP Semiconductors – Low-ohmic single-pole single-throw analog switch

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

NX3L1G384_15 Datasheet, PDF (1/18 Pages) NXP Semiconductors – Low-ohmic single-pole single-throw analog switch

NX3L1G384

Low-ohmic single-pole single-throw analog switch

Rev. 6 â 3 July 2012

Product data sheet

1. General description

The NX3L1G384 is a low-ohmic single-pole single-throw analog switch. It has two

input/output terminals (Y and Z) and an active LOW enable input pin (E). When E is HIGH,

the analog switch is turned off.

Schmitt trigger action at the enable input (E) makes the circuit tolerant to slower input rise

and fall times. The NX3L1G384 allows signals with amplitude up to VCC to be transmitted

from Y to Z; or from Z to Y. Its low ON resistance (0.5 ï) and flatness (0.13 ï) ensures

minimal attenuation and distortion of transmitted signals.

2. Features and benefits

ï® Wide supply voltage range from 1.4 V to 4.3 V

ï® Very low ON resistance (peak):

ïµ 1.6 ï (typical) at VCC = 1.4 V

ïµ 1.0 ï (typical) at VCC = 1.65 V

ïµ 0.55 ï (typical) at VCC = 2.3 V

ïµ 0.50 ï (typical) at VCC = 2.7 V

ïµ 0.50 ï (typical) at VCC = 4.3 V

ï® High noise immunity

ï® ESD protection:

ïµ HBM JESD22-A114F Class 3A exceeds 7500 V

ïµ MM JESD22-A115-A exceeds 200 V

ïµ CDM AEC-Q100-011 revision B exceeds 1000 V

ïµ IEC61000-4-2 contact discharge exceeds 4000 V for switch ports

ï® CMOS low-power consumption

ï® Latch-up performance exceeds 100 mA per JESD 78 Class II Level A

ï® Direct interface with TTL levels at 3.0 V

ï® Control input accepts voltages above supply voltage

ï® High current handling capability (350 mA continuous current under 3.3 V supply)

ï® Specified from ï40 ï°C to +85 ï°C and from ï40 ï°C to +125 ï°C

3. Applications

ï® Cell phone

ï® PDA

ï® Portable media player

▷