|
NTSX2102_15 Datasheet, PDF (1/20 Pages) NXP Semiconductors – Dual supply translating transceiver; open drain; auto direction sensing | |||
|
NTSX2102
Dual supply translating transceiver; open drain; auto
direction sensing
Rev. 2 â 11 February 2013
Product data sheet
1. General description
The NTSX2102 is a 2-bit, dual supply translating transceiver with auto direction sensing,
that enables bidirectional voltage level translation. It features two 2-bit input-output ports
(An and Bn), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). Both
supplies can be supplied at any voltage between 1.65 V and 5.5 V. This flexibility makes
the device suitable for translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V
and 5.0 V). Pins An and OE are referenced to VCC(A) and pins Bn are referenced to VCC(B).
A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state. This
device is fully specified for partial power-down applications using IOFF. The IOFF circuitry
disables the output, preventing the damaging backflow current through the device when it
is powered down.
2. Features and benefits
ï® Wide supply voltage range:
ïµ VCC(A): 1.65 V to 5.5 V and VCC(B): 1.65 V to 5.5 V
ï® Maximum data rates:
ïµ 50 Mbps
ï® IOFF circuitry provides partial Power-down mode operation
ï® Inputs accept voltages up to 5.5 V
ï® ESD protection:
ïµ HBM JS-001 Class 2 exceeds 2000 V
ïµ CDM JESD22-C101E exceeds 2000 V
ï® Latch-up performance exceeds 100 mA per JESD 78B Class II
ï® Multiple package options
ï® Specified from ï40 ï°C to +85 ï°C
3. Applications
ï® I2C/SMBus
ï® UART
ï® GPIO
|
▷ |