|
NTS0103_15 Datasheet, PDF (1/20 Pages) NXP Semiconductors – Dual supply translating transceiver; open drain; auto direction sensing | |||
|
NTS0103
Dual supply translating transceiver; open drain; auto
direction sensing
Rev. 2 â 10 November 2011
Product data sheet
1. General description
The NTS0103 is a 3-bit, dual supply translating transceiver with auto direction sensing,
that enables bidirectional voltage level translation. It features two 3-bit input-output ports
(An and Bn), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A)
can be supplied at any voltage between 1.65 V and 3.6 V and VCC(B) can be supplied at
any voltage between 2.3 V and 5.5 V, making the device suitable for translating between
any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to
VCC(A) and pins Bn are referenced to VCC(B). A LOW level at pin OE causes the outputs to
assume a high-impedance OFF-state. This device is fully specified for partial power-down
applications using IOFF. The IOFF circuitry disables the output, preventing the damaging
backflow current through the device when it is powered down.
2. Features and benefits
ï® Wide supply voltage range:
ïµ VCC(A): 1.65 V to 3.6 V and VCC(B): 2.3 V to 5.5 V
ï® Maximum data rates:
ïµ Push-pull: 50 Mbps
ï® IOFF circuitry provides partial Power-down mode operation
ï® Inputs accept voltages up to 5.5 V
ï® ESD protection:
ïµ HBM JESD22-A114E Class 2 exceeds 2500 V for A port
ïµ HBM JESD22-A114E Class 3B exceeds 8000 V for B port
ïµ MM JESD22-A115-A exceeds 200 V
ïµ CDM JESD22-C101E exceeds 1500 V
ïµ IEC61000-4-2 contact discharge exceeds 8000 V for B port
ï® Latch-up performance exceeds 100 mA per JESD 78B Class II
ï® Specified from ï40 ï°C to +85 ï°C and ï40 ï°C to +125 ï°C
3. Applications
ï® I2C/SMBus
ï® UART
ï® GPIO
|
▷ |