NTS0101_15 Datasheet, PDF (1/23 Pages) NXP Semiconductors – Dual supply translating transceiver open drain auto direction sensing

NTS0101
Dual supply translating transceiver; open drain; auto
direction sensing
Rev. 5 — 11 August 2014
Product data sheet
1. General description
The NTS0101 is a 1-bit, dual supply translating transceiver with auto direction sensing,
that enables bidirectional voltage level translation. It features two 1-bit input-output ports
(A and B), one output enable input (OE) and two supply pins (V_CC(A) and V_CC(B)). V_CC(A)
can be supplied at any voltage between 1.65 V and 3.6 V. V_CC(B) can be supplied at any
voltage between 2.3 V and 5.5 V. This flexibility makes the device suitable for translating
between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins A and OE are
referenced to V_CC(A) and pin B is referenced to V_CC(B). A LOW level at pin OE causes the
outputs to assume a high-impedance OFF-state. This device is fully specified for partial
power-down applications using I_OFF. The I_OFF circuitry disables the output, preventing the
damaging backflow current through the device when it is powered down.
2. Features and benefits
 Wide supply voltage range:
 V_CC(A): 1.65 V to 3.6 V and V_CC(B): 2.3 V to 5.5 V
 Maximum data rates:
 Push-pull: 50 Mbps
 I_OFF circuitry provides partial Power-down mode operation
 Inputs accept voltages up to 5.5 V
 ESD protection:
 HBM JESD22-A114E Class 2 exceeds 2500 V for A port
 HBM JESD22-A114E Class 3B exceeds 8000 V for B port
 MM JESD22-A115-A exceeds 200 V
 CDM JESD22-C101E exceeds 1500 V
 Latch-up performance exceeds 100 mA per JESD 78B Class II
 Multiple package options
 Specified from 40 C to +85 C and 40 C to +125 C
3. Applications
 I²C/SMBus
 UART
 GPIO