NTB0102_15 Datasheet, PDF (1/26 Pages) NXP Semiconductors – Dual supply translating transceiver; auto direction sensing; 3-state

NTB0102
Dual supply translating transceiver; auto direction sensing;
3-state
Rev. 4 — 23 January 2013
Product data sheet
1. General description
The NTB0102 is a 2-bit, dual supply translating transceiver with auto direction sensing,
that enables bidirectional voltage level translation. It features two 2-bit input-output ports
(An and Bn), one output enable input (OE) and two supply pins (V_CC(A) and V_CC(B)). V_CC(A)
can be supplied at any voltage between 1.2 V and 3.6 V and V_CC(B) can be supplied at any
voltage between 1.65 V and 5.5 V, making the device suitable for translating between any
of the low voltage nodes (1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V and 5.0 V).
Pins An and OE are referenced to V_CC(A) and pins Bn are referenced to V_CC(B). A LOW
level at pin OE causes the outputs to assume a high-impedance OFF-state. This device is
fully specified for partial power-down applications using I_OFF. The I_OFF circuitry disables
the output, preventing the damaging backflow current through the device when it is
powered down.
2. Features and benefits
 Wide supply voltage range:
 V_CC(A): 1.2 V to 3.6 V and V_CC(B): 1.65 V to 5.5 V
 I_OFF circuitry provides partial Power-down mode operation
 Inputs accept voltages up to 5.5 V
 ESD protection:
 HBM JESD22-A114E Class 2 exceeds 2500 V for A port
 HBM JESD22-A114E Class 3B exceeds 15000 V for B port
 MM JESD22-A115-A exceeds 200 V
 CDM JESD22-C101E exceeds 1500 V
 Latch-up performance exceeds 100 mA per JESD 78B Class II
 Multiple package options
 Specified from 40 C to +85 C and 40 C to +125 C