LM124 Datasheet, PDF (1/7 Pages) NXP Semiconductors – Low power quad op amps

Philips Semiconductors
Low power quad op amps
Product specification
LM124/224/324/324A/
SA534/LM2902
DESCRIPTION
The LM124/SA534/LM2902 series consists of four independent,
high-gain, internally frequency-compensated operational amplifiers
designed specifically to operate from a single power supply over a
wide range of voltages.
UNIQUE FEATURES
In the linear mode, the input common-mode voltage range includes
ground and the output voltage can also swing to ground, even
though operated from only a single power supply voltage.
The unity gain crossover frequency and the input bias current are
temperature-compensated.
FEATURES
• Internally frequency-compensated for unity gain
• Large DC voltage gain: 100dB
• Wide bandwidth (unity gain): 1MHz (temperature-compensated)
• Wide power supply range Single supply: 3V_DC to 30V_DC or dual
supplies: ±1.5V_DC to ±15V_DC
• Very low supply current drain: essentially independent of supply
voltage (1mW/op amp at +5V_DC)
• Low input biasing current: 45nA_DC (temperature-compensated)
• Low input offset voltage: 2mV_DC and offset current: 5nA_DC
• Differential input voltage range equal to the power supply voltage
• Large output voltage: 0V_DC to V_CC-1.5V_DC swing
ORDERING INFORMATION
DESCRIPTION
14-Pin Plastic Dual In-Line Package (DIP)
14-Pin Ceramic Dual In-Line Package (CERDIP)
14-Pin Plastic Dual In-Line Package (DIP)
14-Pin Ceramic Dual In-Line Package (CERDIP)
14-Pin Plastic Small Outline (SO) Package
14-Pin Plastic Dual In-Line Package (DIP)
14-Pin Ceramic Dual In-Line Package (CERDIP)
14-Pin Plastic Small Outline (SO) Package
14-Pin Plastic Dual In-Line Package (DIP)
14-Pin Plastic Small Outline (SO) Package
14-Pin Plastic Dual In-Line Package (DIP)
14-Pin Ceramic Dual In-Line Package (CERDIP)
14-Pin Plastic Small Outline (SO) Package
14-Pin Plastic Small Outline (SO) Package
14-Pin Plastic Dual In-Line Package (DIP)
PIN CONFIGURATION
D, F, N Packages
OUTPUT 1 1
14 OUTPUT 4
–INPUT 1 ²
1
–+
4
+–
13 _{–INPUT 4}
+INPUT 1 3
12 +INPUT 4
V+ ⁴
11 GND
+INPUT 2 ⁵
10 +INPUT 3
–INPUT 2 6
–2+
+–
3
9 –INPUT 3
OUTPUT 2 7
8 OUTPUT 3
TOP VIEW
Figure 1. Pin Configuration
SL00065
TEMPERATURE RANGE
-55°C to +125°C
-55°C to +125°C
-25°C to +85°C
-25°C to +85°C
-25°C to +85°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +125°C
-40°C to +125°C
ORDER CODE
LM124N
LM124F
LM224N
LM224F
LM224D
LM324N
LM324F
LM324D
LM324AN
LM324AD
SA534N
SA534F
SA534D
LM2902D
LM2902N
DWG #
SOT27-1
0581B
SOT27-1
0581B
SOT108-1
SOT27-1
0581B
SOT108-1
SOT27-1
SOT108-1
SOT27-1
0581B
SOT108-1
SOT108-1
SOT27-1
1995 Nov 27
1
853-0929 16050