|
ISP1130 Datasheet, PDF (1/68 Pages) NXP Semiconductors – Universal Serial Bus compound hub with integrated keyboard controller | |||
|
ISP1130
Universal Serial Bus compound hub with integrated keyboard
controller
Rev. 01 â 23 March 2000
Objective speciï¬cation
1. General description
The ISP1130 integrates a Universal Serial Bus (USB) hub with a keyboard controller
into a single chip, which complies with Universal Serial Bus Speciï¬cation Rev. 1.1 and
the USB Device Class Deï¬nition for Human Interface Devices (HID). The hub has
1 to 2 downstream ports and 1 to 3 non-removable embedded functions, one of
which is dedicated to the keyboard operation. The hub controller is fully implemented
in hardware, ensuring a fast response to host requests.
The integrated 5 V to 3.3 V regulator allows direct connection to the USB power
supply VBUS. The downstream ports are either bus-powered or hybrid-powered and
can interface low-power USB devices such as a joystick or a mouse. ISP1130 uses
SoftConnect⢠technology to connect to the USB host upon detection of VBUS. The
low power consumption in âsuspendâ mode allows easy design of equipment that is
compliant with the ACPIâ¢, OnNow⢠and USB power management requirements.
The integrated keyboard controller is based on the 80C51 family and has 8 kbytes of
mask ROM and 256 bytes of data RAM. The code memory is protected against
reading by an external device. A built-in watchdog timer resets the device in case of a
microcontroller hang-up. To reduce power consumption, the microcontroller can be
put in sleep mode or power-down mode.
c
c
A serial I2C-bus interface is provided for optional access to an external EEPROM.
This allows the user to program the vendor ID, product ID or activate the built-in
keyboard matrix.
The ISP1130 has built-in overcurrent sense inputs, supporting individual and global
overcurrent protection for downstream ports. All ports (including the hub) have
GoodLink⢠indicator outputs for easy visual monitoring of USB trafï¬c. The ISP1130
has a reduced frequency (6 MHz) crystal oscillator to minimize Electro Magnetic
Interference (EMI). These features allow signiï¬cant cost savings in system design
and easy implementation of advanced USB functionality into PC peripherals.
2. Features
s Compound USB hub device with integrated hub repeater, hub controller, Serial
Interface Engine (SIE), data transceivers and 5 V to 3.3 V voltage regulator
s Complies with Universal Serial Bus Speciï¬cation Rev. 1.1 and Device Class
Deï¬nition for Human Interface Devices (HID)
s Complies with ACPI, OnNow and USB power management requirements
|
▷ |