ISP1122A Datasheet, PDF (1/48 Pages) NXP Semiconductors – Universal Serial Bus stand-alone hub

ISP1122A
Universal Serial Bus stand-alone hub
Rev. 01 — 27 March 2000
Preliminary specification
1. General description
The ISP1122A is a stand-alone Universal Serial Bus (USB) hub device which
complies with USB Specification Rev. 1.1. It integrates a Serial Interface Engine
(SIE), hub repeater, hub controller, USB data transceivers and a 3.3 V voltage
regulator. It has a configurable number of downstream ports, ranging from 2 to 5.
The ISP1122A can be bus-powered, self-powered or hybrid-powered. When it is
hybrid-powered the hub functions are powered by the upstream power supply (V_BUS),
but the downstream ports are powered by an external 5 Volt supply. The low power
consumption in ‘suspend’ mode allows easy design of equipment that is compliant
with the ACPI™, OnNow™ and USB power management requirements.
The ISP1122A has built-in overcurrent sense inputs, supporting individual and global
overcurrent protection for downstream ports. All ports (including the hub) have
GoodLink™ indicator outputs for easy visual monitoring of USB traffic. The ISP1122A
has a serial I²C-bus interface for external EEPROM access and a reduced frequency
(6 MHz) crystal oscillator. These features allow significant cost savings in system
design and easy implementation of advanced USB functionality into PC peripherals.
2. Features
c
c
s High performance USB hub device with integrated hub repeater, hub controller,
Serial Interface Engine (SIE), data transceivers and 3.3 V voltage regulator
s Complies with Universal Serial Bus Specification Rev. 1.1 and ACPI, OnNow and
USB power management requirements
s Configurable from 2 to 5 downstream ports with automatic speed detection
s Internal power-on reset and low voltage reset circuit
s Supports bus-powered, hybrid-powered and self-powered application
s Individual or ganged power switching for downstream ports
s Individual or global port overcurrent protection with built-in sense circuits
s 6 MHz crystal oscillator with on-chip PLL for low EMI
s Visual USB traffic monitoring (GoodLink™) for hub and downstream ports
s I²C-bus interface to read vendor ID, product ID and configuration bits from
external EEPROM
s Operation over the extended USB bus voltage range (4.0 to 5.5 V)
s Operating temperature range −40 to +85 °C
s 8 kV in-circuit ESD protection for lower cost of external components