|
ISP1107 Datasheet, PDF (1/19 Pages) NXP Semiconductors – Advanced Universal Serial Bus transceiver | |||
|
ISP1107
Advanced Universal Serial Bus transceiver
Rev. 01 â 23 February 2000
Objective speciï¬cation
1. General description
The ISP1107 is a Universal Serial Bus (USB) transceiver that is fully compliant with
the Universal Serial Bus Speciï¬cation Rev. 1.1. It is ideal for portable electronics
devices such as mobile phones, digital still cameras and personal digital assistants. It
allows 1.8 V, 2.5 V and 3.3 V USB Application Speciï¬c ICs (ASICs) and
Programmable Logic Devices (PLDs) to interface with the physical layer of the
Universal Serial Bus. It has an integrated 5 V to 3.3 V voltage regulator allowing
direct powering from the USB supply VBUS.
The ISP1107 can be used as a USB device transceiver or a USB host transceiver. It
can transmit and receive serial data at both full-speed (12 Mbit/s) and low-speed
(1.5 Mbit/s) data rates. The ISP1107 is compatible with the industry-standard Philips
Semiconductors USB transceiver PDIUSBP11A.
2. Features
s Complies with Universal Serial Bus Speciï¬cation Rev. 1.1
s Integrated 5 V to 3.3 V voltage regulator allowing direct powering from USB VBUS
s Used as a USB device transceiver or a USB host transceiver
c
c
s Supports full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) serial data rates
s Slew-rate controlled differential data driver
s Differential input receiver with wide common-mode range and very high input
sensitivity
s Stable RCV output during SE0 condition
s Two single-ended receivers with hysteresis
s Low-power operation
s Three I/O voltage levels: 1.8 V, 2.5 V and 3.3 V
s Backward compatible with PDIUSBP11A
s Higher than 8 kV ESD protection
s Full industrial operating temperature range â40 to +85 °C
s Available in small TSSOP16 and BCC16 packages.
|
▷ |