IP4283CZ10_SER_15 Datasheet, PDF (1/14 Pages) NXP Semiconductors – ESD protection for ultra high-speed interfaces

IP4283CZ10 series
ESD protection for ultra high-speed interfaces
Rev. 4 — 8 April 2013
Product data sheet
1. Product profile
1.1 General description
The devices are designed to protect high-speed interfaces such as High-Definition
Multimedia Interface (HDMI), DisplayPort, external Serial Advanced Technology
Attachment (eSATA) and Low-Voltage Differential Signaling (LVDS) interfaces against
ElectroStatic Discharge (ESD).
The devices include four high-level ESD protection diode structures for ultra high-speed
signal lines. They are available in three package variants: DFN2510-10 (SOT1165-1),
DFN2510A-10 (SOT1176-1) and TSSOP10 (SOT552-1).
All signal lines are protected by a special diode configuration offering ultra low line
capacitance of only 0.6 pF. These diodes provide protection to downstream components
from ESD voltages up to 8 kV contact according to IEC 61000-4-2, level 4.
1.2 Features and benefits
 System ESD protection for HDMI, DisplayPort, eSATA and LVDS
 All signal lines with integrated rail-to-rail clamping diodes for downstream
ESD protection of 8 kV according to IEC 61000-4-2, level 4
 Matched 0.5 mm trace spacing
 Signal lines with  0.05 pF matching capacitance between signal pairs
 Line capacitance of only 0.6 pF for each channel
 Design-friendly ‘pass-thru’ signal routing
1.3 Applications
The devices are designed for high-speed receiver and transmitter port protection:
 TVs, monitors
 DVD recorders and players
 Notebooks, main board graphics cards and ports
 Set-top boxes and game consoles