IP3319CX6_15 Datasheet, PDF (1/15 Pages) NXP Semiconductors – Single-channel common-mode filter with integrated ESD protection network

IP3319CX6
Single-channel common-mode filter with integrated ESD
protection network
Rev. 2 — 29 May 2013
Product data sheet
1. Product profile
1.1 General description
2-lines (one differential channel) common-mode filter with integrated ESD protection up to
15 kV contact discharge, exceeding IEC 61000-4-2, level 4. The device can eliminate
efficiently common-mode noise from USB 2.0 and other high-speed interfaces with
differential lines. IP3319CX6 attenuates significantly common-mode noise above
800 MHz while differential-mode signal extends out to more than 1 GHz before reaching
the 3 dB point.
IP3319CX6 is designed to protect sensitive I/Os, such as USB 2.0, Ethernet, Digital Video
Interface (DVI) and Low-Voltage Differential Signaling (LVDS) interfaces from destruction
by ElectroStatic Discharge (ESD).
IP3319CX6 is a combination of an integrated copper-coils common-mode filter and a
monolithic silicon technology-based ESD protection. It integrates two ultra-low
capacitance rail-to-rail diodes plus a separated protection diode in a 0.4 mm pitch
Wafer-Level Chip-Size Package (WLCSP). Due to the rail-to-rail concept, the protection is
working independently from availability of a supply voltage
1.2 Features and benefits
 2-lines (one differential mode)
common-mode filter
 ESD protection for the USB ID line
 Extremely low clamping voltage
 ESD protection up to 15 kV on external
contact pins
 Ultra low ESD diode capacitance
 WLCSP6 with 0.4 mm pitch
1.3 Applications
 USB 2.0 High-speed lines
 LVDS interfaces
 DVI
1.4 Quick reference data
Table 1. Quick reference data
Symbol Parameter
Conditions
Min Typ Max Unit
R_s(ch) channel series resistance single line; input to output
-
6
-

C_d
diode capacitance
V_I = 0 V; f = 1 MHz;
pins A2, B2 to GND
[1] _-
1.5 -
pF
[1] This parameter is guaranteed by design.