HEF40098B_15 Datasheet, PDF (1/13 Pages) NXP Semiconductors – Hex inverting buffer; 3-state

HEF40098B
Hex inverting buffer; 3-state
Rev. 8 — 21 November 2011
Product data sheet
1. General description
The HEF40098B is a hex inverting buffer with 3-state outputs. The 3-state outputs are
controlled by two active LOW enable inputs (1OE and 2OE). A HIGH on 1OE causes four
of the six active LOW buffer elements (1Y0 to 1Y3) to assume a high-impedance or
OFF-state regardless of the other input conditions and a HIGH on 2OE causes the outputs
of the remaining two buffer elements (2Y0 and 2Y1) to assume a high-impedance or
OFF-state regardless of the other input conditions.
It operates over a recommended V_DD power supply range of 3 V to 15 V referenced to V_SS
(usually ground). Unused inputs must be connected to V_DD, V_SS, or another input.
2. Features and benefits
 Fully static operation
 5 V, 10 V, and 15 V parametric ratings
 Standardized symmetrical output characteristics
 Specified from 40 C to +85 C
 Complies with JEDEC standard JESD 13-B
3. Ordering information
Table 1. Ordering information
All types operate from 40 C to +85 C
Type number Package
Name
Description
HEF40098BP DIP16
plastic dual in-line package; 16-leads (300 mil)
HEF40098BT
SO16
plastic small outline package; 16 leads; body width 3.9 mm
Version
SOT38-4
SOT109-1