BGA2714 Datasheet, PDF (1/15 Pages) NXP Semiconductors – MMIC wideband amplifier

BGA2714
MMIC wideband amplifier
Rev. 01 — 24 May 2007
Product data sheet
1. Product profile
1.1 General description
Silicon Monolitic Microwave Integrated Circuit (MMIC) wideband amplifier with internal
matching circuit in a 6-pin SOT363 plastic SMD package.
Table 1. Typical performance
T_amb = 25 °C; measured on demo board; typical values.
f
V_SUP
I_SUP
G_p
NF
(MHz)
(V)
(mA)
(dB)
(dB)
250
3.0
4.58
20.7
2.4
950
3.0
4.58
20.4
2.2
2150
3.0
4.58
20.8
3.0
P_L(1dB)
(dBm)
−7.8
−7.9
−9.0
P_L(sat)
(dBm)
−2.4
−3.4
−4.7
IP3_O
(dBm)
4.3
2.1
0.0
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken
during transport and handling.
1.2 Features
I Internally matched to 50 Ω
I Wide frequency range (2.7 GHz at 3 dB gain bandwidth)
I Flat 21 dB gain (± 1 dB from DC up to 2500 MHz)
I Very low current (4.6 mA) at low supply voltage of 3 V
I Very good reverse isolation (> 50 dB up to 2 GHz)
I Good linearity with low second order and third order products
I Low noise (NF = 2.2 dB at 1 GHz)
I Unconditionally stable (K > 5)
1.3 Applications
I LNB IF amplifiers
I General purpose low noise wideband amplifier for frequencies between
DC and 2.7 GHz