|
74LVC_LVCH244A_15 Datasheet, PDF (1/19 Pages) NXP Semiconductors – Octal buffer/line driver; 3-state | |||
|
74LVC244A; 74LVCH244A
Octal buffer/line driver; 3-state
Rev. 8 â 26 June 2013
Product data sheet
1. General description
The 74LVC244A; 74LVCH244A is an octal non-inverting buffer/line driver with 3-state
outputs. The 3-state outputs are controlled by the output enable inputs 1OE and 2OE.
A HIGH on nOE causes the outputs to assume a high-impedance OFF-state.
Schmitt-trigger action at all inputs makes the circuit highly tolerant for slower input rise
and fall times.
Inputs can be driven from either 3.3 V or 5.0 V devices. In 3-state operation, outputs can
handle 5 V. These features allow the use of these devices as translators in a mixed
3.3 V and 5 V environment.
The 74LVCH244A bus hold on data inputs eliminates the need for external pull-up
resistors to hold unused inputs.
2. Features and benefits
ï® 5 V tolerant inputs/outputs for interfacing with 5 V logic
ï® Wide supply voltage range from 1.2 V to 3.6 V
ï® CMOS low-power consumption
ï® Direct interface with TTL levels
ï® Inputs accept voltages up to 5.5 V
ï® High-impedance when VCC = 0 V
ï® Bus hold on all data inputs (74LVCH244A only)
ï® Complies with JEDEC standard:
ïµ JESD8-7A (1.65 V to 1.95 V)
ïµ JESD8-5A (2.3 V to 2.7 V)
ïµ JESD8-C/JESD36 (2.7 V to 3.6 V)
ï® ESD protection:
ïµ HBM JESD22-A114F exceeds 2000 V
ïµ MM JESD22-A115B exceeds 200 V
ïµ CDM JESD22-C101E exceeds 1000 V
ï® Specified from ï40 ï°C to +85 ï°C and ï40 ï°C to +125 ï°C
|
▷ |