74LVC574ABQ Datasheet, PDF (1/19 Pages) NXP Semiconductors – Octal D-type flip-flop with 5 V tolerant inputs/outputs; positive edge-trigger 3-state

74LVC574A
Octal D-type flip-flop with 5 V tolerant inputs/outputs; positive
edge-trigger; 3-state
Rev. 5 — 18 December 2012
Product data sheet
1. General description
The 74LVC574A is an octal D-type flip-flop featuring separate D-type inputs for each
flip-flop and 3-state outputs for bus-oriented applications. A clock (CP) and an Output
Enable (OE) input are common to all flip-flops.
The eight flip-flops will store the state of their individual D-inputs that meet the set-up and
hold times requirements on the LOW to HIGH CP transition.
When OE is LOW, the contents of the eight flip-flops are available at the outputs. When
OE is HIGH, the outputs go to the high-impedance OFF-state. Operation of the OE input
does not affect the state of the flip-flops.
Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be
applied to the outputs. These features allow the use of these devices as translators in
mixed 3.3 V or 5 V applications.
The 74LVC574A is functionally identical to the 74LVC374A, but has a different pin
arrangement.
2. Features and benefits
 5 V tolerant inputs for interfacing with 5 V logic
 Supply voltage range from 1.2 V to 3.6 V
 CMOS low power consumption
 Direct interface with TTL levels
 High-impedance when V_CC = 0 V
 8-bit positive edge-triggered register
 Independent register and 3-state buffer operation
 Flow-through pin-out architecture
 Complies with JEDEC standard:
 JESD8-7A (1.65 V to 1.95 V)
 JESD8-5A (2.3 V to 2.7 V)
 JESD8-C/JESD36 (2.7 V to 3.6 V)
 ESD protection:
 HBM JESD22-A114F exceeds 2000 V
 MM JESD22-A115-B exceeds 200 V
 CDM JESD22-C101E exceeds 1000 V
 Specified from 40 C to +85 C and 40 C to +125 C