74LVC257A_15 Datasheet, PDF (1/18 Pages) NXP Semiconductors – Quad 2-input multiplexer with 5 V tolerant inputs/outputs; 3-state

74LVC257A
Quad 2-input multiplexer with 5 V tolerant inputs/outputs;
3-state
Rev. 6 — 28 November 2011
Product data sheet
1. General description
The 74LVC257A is a quad 2-input multiplexer with 3-state outputs, which select 4 bits of
data from two sources and are controlled by a common data select input (pin S). The data
inputs from source 0 (pins 1I0 to 4I0) are selected when pin S is LOW and the data inputs
from source 1 (pins 1I1 to 4I1) are selected when pin S is HIGH. Data appears at the
outputs (pins 1Y to 4Y) in true (non-inverting) form from the selected inputs. The device is
the logic implementation of a 4-pole, 2-position switch, where the position of the switch is
determined by the logic levels applied to pin S. The outputs are forced to a
high-impedance OFF-state when pin OE is HIGH.
Inputs can be driven from either 3.3 V or 5.0 V devices. When disabled, up to 5.5 V can be
applied to the outputs. These features allow the use of these devices as translators in
mixed 3.3 V and 5 V applications.
2. Features and benefits
 5 V tolerant inputs/outputs, for interfacing with 5 V logic
 Wide supply voltage range from 1.2 V to 3.6 V
 CMOS low-power consumption
 Direct interface with TTL levels
 Output drive capability 50  transmission lines at 85 C
 Complies with JEDEC standard:
 JESD8-7A (1.65 V to 1.95 V)
 JESD8-5A (2.3 V to 2.7 V)
 JESD8-C/JESD36 (2.7 V to 3.6 V)
 ESD protection:
 HBM JESD22-A114F exceeds 2000 V
 MM JESD22-A115B exceeds 200 V
 CDM JESD22-C101E exceeds 1000 V
 Specified from 40 C to +85 C and 40 C to +125 C