74LVC240A_15 Datasheet, PDF (1/17 Pages) NXP Semiconductors – Octal buffer/line driver with 5 V tolerant inputs/outputs; inverting; 3-state

74LVC240A
Octal buffer/line driver with 5 V tolerant inputs/outputs;
inverting; 3-state
Rev. 8 — 29 November 2011
Product data sheet
1. General description
The 74LVC240A is an octal inverting buffer/line driver with 3-state outputs. The 3-state
outputs are controlled by the output enable inputs 1OE and 2OE. A HIGH on nOE causes
the outputs to assume a high-impedance OFF-state. Schmitt trigger action at all inputs
makes the circuit highly tolerant of slower input rise and fall times.
Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be
applied to the outputs. These features allow the use of these devices as translators in
mixed 3.3 V or 5 V applications.
The 74LVC240A is functionally identical to the 74LVC244A except that the 244 has
non-inverting outputs.
2. Features and benefits
 5 V tolerant inputs for interlacing with 5 V logic
 Supply voltage range from 1.2 V to 3.6 V
 CMOS low power consumption
 Direct interface with TTL levels
 High-impedance when V_CC = 0 V
 Complies with JEDEC standard:
 JESD8-7A (1.65 V to 1.95 V)
 JESD8-5A (2.3 V to 2.7 V)
 JESD8-C/JESD36 (2.7 V to 3.6 V)
 ESD protection:
 HBM JESD22-A114F exceeds 2000 V
 MM JESD22-A115B exceeds 200 V
 CDM JESD22-C101E exceeds 1000 V
 Specified from 40 C to +85 C and 40 C to +125 C