74LVC16245A Datasheet, PDF (1/19 Pages) NXP Semiconductors – 16-bit bus transceiver with direction pin; 5V tolerant 3-State

74LVC16245A; 74LVCH16245A
16-bit bus transceiver with direction pin; 5 V tolerant; 3-state
Rev. 08 — 6 November 2008
Product data sheet
1. General description
The 74LVC16245A; 74LVCH16245A are 16-bit transceivers featuring non-inverting
3-state bus compatible outputs in both send and receive directions. The device features
two output enable (nOE) inputs for easy cascading and two send/receive (nDIR) inputs for
direction control. nOE controls the outputs so that the buses are effectively isolated. This
device can be used as two 8-bit transceivers or one 16-bit transceiver.
Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be
applied to the outputs. These features allow the use of these devices in mixed
3.3 V and 5 V applications.
The 74LVCH16245A bus hold on data inputs eliminates the need for external pull-up
resistors to hold unused inputs.
2. Features
I 5 V tolerant inputs/outputs for interfacing with 5 V logic
I Wide supply voltage range from 1.2 V to 3.6 V
I CMOS low power consumption
I MULTIBYTE flow-through standard pin-out architecture
I Low inductance multiple power and ground pins for minimum noise and ground
bounce
I Direct interface with TTL levels
I High-impedance when V_CC = 0 V
I All data inputs have bus hold. (74LVCH16245A only)
I Complies with JEDEC standard JESD8-B / JESD36
I ESD protection:
N HBM JESD22-A114E exceeds 2000 V
N CDM JESD22-C101C exceeds 1000 V
I Specified from −40 °C to +85 °C and −40 °C to +125 °C