|
74HC_HCT138_15 Datasheet, PDF (1/19 Pages) NXP Semiconductors – 3-to-8 line decoder/demultiplexer; inverting | |||
|
74HC138; 74HCT138
3-to-8 line decoder/demultiplexer; inverting
Rev. 5 â 26 January 2015
Product data sheet
1. General description
The 74HC138; 74HCT138 decodes three binary weighted address inputs (A0, A1 and A2)
to eight mutually exclusive outputs (Y0 to Y7). The device features three enable inputs
(E1, E2 and E3). Every output will be HIGH unless E1 and E2 are LOW and E3 is HIGH.
This multiple enable function allows easy parallel expansion to a 1-of-32 (5 to 32 lines)
decoder with just four â138â ICs and one inverter. The â138â can be used as an eight output
demultiplexer by using one of the active LOW enable inputs as the data input and the
remaining enable inputs as strobes. Inputs include clamp diodes. This enables the use of
current limiting resistors to interface inputs to voltages in excess of VCC.
2. Features and benefits
ï® Complies with JEDEC standard no. 7A
ï® Input levels:
ïµ For 74HC138: CMOS level
ïµ For 74HCT138: TTL level
ï® Demultiplexing capability
ï® Multiple input enable for easy expansion
ï® Ideal for memory chip select decoding
ï® Active LOW mutually exclusive outputs
ï® ESD protection:
ïµ HBM JESD22-A114F exceeds 2000 V
ïµ MM JESD22-A115-A exceeds 200 V
ï® Multiple package options
ï® Specified from ï40 ï°C to +85 ï°C and from ï40 ï°C to +125 ï°C
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range Name
74HC138N
ï40 ï°C to +125 ï°C DIP16
74HCT138N
74HC138D
ï40 ï°C to +125 ï°C SO16
74 HCT138D
74HC138DB
ï40 ï°C to +125 ï°C SSOP16
74HCT138DB
Description
Version
plastic dual in-line package; 16 leads (300 mil) SOT38-4
plastic small outline package; 16 leads;
body width 3.9 mm
plastic shrink small outline package; 16 leads;
body width 5.3 mm
SOT109-1
SOT338-1
|
▷ |