74HC74DB118 Datasheet, PDF (1/21 Pages) NXP Semiconductors – Dual D-type flip-flop with set and reset; positive edge-trigger

74HC74; 74HCT74
Dual D-type flip-flop with set and reset; positive edge-trigger
Rev. 4 — 27 August 2012
Product data sheet
1. General description
The 74HC74 and 74HCT74 are dual positive edge triggered D-type flip-flop. They have
individual data (nD), clock (nCP), set (nSD) and reset (nRD) inputs, and complementary
nQ and nQ outputs. Data at the nD-input, that meets the set-up and hold time
requirements on the LOW-to-HIGH clock transition, is stored in the flip-flop and appears at
the nQ output. Schmitt-trigger action in the clock input, makes the circuit highly tolerant to
slower clock rise and fall times. Inputs include clamp diodes that enable the use of current
limiting resistors to interface inputs to voltages in excess of V_CC.
2. Features and benefits
 Input levels:
 For 74HC74: CMOS level
 For 74HCT74: TTL level
 Symmetrical output impedance
 Low power dissipation
 High noise immunity
 Balanced propagation delays
 Specified in compliance with JEDEC standard no. 7A
 ESD protection:
 HBM JESD22-A114F exceeds 2000 V
 MM JESD22-A115-A exceeds 200 V
 Multiple package options
 Specified from 40 C to +85 C and from 40 C to +125 C
3. Ordering information
Table 1. Ordering information
Type number Package
Temperature range
74HC74N
40 C to +125 C
74HCT74N
74HC74D
40 C to +125 C
74HCT74D
74HC74DB 40 C to +125 C
74HCT74DB
Name
DIP14
SO14
SSOP14
Description
plastic dual in-line package; 14 leads (300 mil)
Version
SOT27-1
plastic small outline package; 14 leads; body width SOT108-1
3.9 mm
plastic shrink small outline package; 14 leads; body SOT337-1
width 5.3 mm