English
Language : 

74CBTLVD3245_15 Datasheet, PDF (1/19 Pages) NXP Semiconductors – 8-bit level-shifting bus switch with output enable
74CBTLVD3245
8-bit level-shifting bus switch with output enable
Rev. 3 — 16 December 2011
Product data sheet
1. General description
The 74CBTLVD3245 is an 8-pole, single-throw bus switch. The device features a single
output enable input (OE) that controls eight switch channels. The switches are disabled
when OE is HIGH. Schmitt trigger action at control inputs makes the circuit tolerant of
slower input rise and fall times. This device is fully specified for partial power-down
applications using IOFF. The IOFF circuitry disables the output, preventing the damaging
backflow current through the device when it is powered down.
2. Features and benefits
 Supply voltage range from 3.0 V to 3.6 V
 High noise immunity
 Complies with JEDEC standard:
 JESD8-B/JESD36 (3.0 V to 3.6 V)
 ESD protection:
 HBM JESD22-A114F exceeds 2000 V
 CDM AEC-Q100-011 revision B exceeds 1000 V
 5  switch connection between two ports
 Rail to rail switching on data I/O ports
 CMOS low power consumption
 Latch-up performance exceeds 250 mA per JESD78B Class I level A
 IOFF circuitry provides partial Power-down mode operation
 Multiple package options
 Specified from 40 C to +85 C and 40 C to +125 C
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature
range
Name
Description
74CBTLVD3245DS 40 C to +125 C SSOP20[1] plastic shrink small outline package; 20 leads; body
width 3.9 mm; lead pitch 0.635 mm
74CBTLVD3245PW 40 C to +125 C TSSOP20 plastic thin shrink small outline package; 20 leads;
body width 4.4 mm
74CBTLVD3245BQ 40 C to +125 C DHVQFN20 plastic dual-in-line compatible thermal enhanced very
thin quad flat package; no leads; 20 terminals; body
2.5  4.5  0.85 mm
Version
SOT724-1
SOT360-1
SOT764-1