74AVC32T245_15 Datasheet, PDF(1/24 Page) NXP Semiconductors – 32-bit dual supply translating transceiver with configurable voltage translation; 3-state

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

74AVC32T245_15 Datasheet, PDF (1/24 Pages) NXP Semiconductors – 32-bit dual supply translating transceiver with configurable voltage translation; 3-state

74AVC32T245

32-bit dual supply translating transceiver with configurable

voltage translation; 3-state

Rev. 1 â 16 January 2013

Product data sheet

1. General description

The 74AVC32T245 is a 32-bit transceiver with bidirectional level voltage translation and

3-state outputs. The device can be used as eight 8-bit input-output ports (nAn and nBn),

two 16-bit transceiver or as a 32-bit transceiver. It has dual supplies (VCC(A) and VCC(B))

for voltage translation and four 8-bit input-output ports (nAn and nBn) each with its own

output enable (nOE) and send/receive (nDIR) input for direction control. VCC(A) and VCC(B)

can be independently supplied at any voltage between 0.8 V and 3.6 V making the device

suitable for low voltage translation between any of the following voltages: 0.8 V, 1.2 V,

1.5 V, 1.8 V, 2.5 V and 3.3 V. A HIGH on nDIR selects transmission from nAn to nBn while

a LOW on nDIR selects transmission from nBn to nAn. A HIGH on nOE causes the

outputs to assume a high-impedance OFF-state

The device is fully specified for partial power-down applications using IOFF. The IOFF

circuitry disables the output, preventing any damaging backflow current through the

device when it is powered down. In suspend mode when either VCC(A) or VCC(B) are at

GND level, both nAn and nBn are in the high-impedance OFF-state.

2. Features and benefits

ï® Wide supply voltage range:

ïµ VCC(A): 0.8 V to 3.6 V

ïµ VCC(B): 0.8 V to 3.6 V

ï® Complies with JEDEC standards:

ïµ JESD8-12 (0.8 V to 1.3 V)

ïµ JESD8-11 (0.9 V to 1.65 V)

ïµ JESD8-7 (1.2 V to 1.95 V)

ïµ JESD8-5 (1.8 V to 2.7 V)

ïµ JESD8-B (2.7 V to 3.6 V)

ï® ESD protection:

ïµ HBM JESD22-A114F Class 3B exceeds 8000 V

ïµ MM JESD22-A115-A exceeds 200 V

ïµ CDM JESD22-C101D exceeds 1000 V

ï® Maximum data rates:

ïµ 380 Mbit/s (ï³ 1.8 V to 3.3 V translation)

ïµ 200 Mbit/s (ï³ 1.1 V to 3.3 V translation)

ïµ 200 Mbit/s (ï³ 1.1 V to 2.5 V translation)

ïµ 200 Mbit/s (ï³ 1.1 V to 1.8 V translation)

ïµ 150 Mbit/s (ï³ 1.1 V to 1.5 V translation)

▷