74AUP1G34_15 Datasheet, PDF (1/20 Pages) NXP Semiconductors – Low-power buffer

74AUP1G34
Low-power buffer
Rev. 6 — 28 June 2012
Product data sheet
1. General description
The 74AUP1G34 provides a low-power, low-voltage single buffer.
Schmitt trigger action at all inputs makes the circuit tolerant to slower input rise and fall
times across the entire V_CC range from 0.8 V to 3.6 V.
This device ensures a very low static and dynamic power consumption across the entire
V_CC range from 0.8 V to 3.6 V.
This device is fully specified for partial power-down applications using I_OFF.
The I_OFF circuitry disables the output, preventing the damaging backflow current through
the device when it is powered down.
2. Features and benefits
 Wide supply voltage range from 0.8 V to 3.6 V
 High noise immunity
 Complies with JEDEC standards:
 JESD8-12 (0.8 V to 1.3 V)
 JESD8-11 (0.9 V to 1.65 V)
 JESD8-7 (1.2 V to 1.95 V)
 JESD8-5 (1.8 V to 2.7 V)
 JESD8-B (2.7 V to 3.6 V)
 ESD protection:
 HBM JESD22-A114F Class 3A exceeds 5000 V
 MM JESD22-A115-A exceeds 200 V
 CDM JESD22-C101E exceeds 1000 V
 Low static power consumption; I_CC = 0.9 μA (maximum)
 Latch-up performance exceeds 100 mA per JESD 78 Class II
 Inputs accept voltages up to 3.6 V
 Low noise overshoot and undershoot < 10 % of V_CC
 I_OFF circuitry provides partial power-down mode operation
 Multiple package options
 Specified from −40 °C to +85 °C and −40 °C to +125 °C