74AUP1G14 Datasheet, PDF (1/20 Pages) NXP Semiconductors – Low-power Schmitt-trigger inverter

74AUP1G14
Low-power Schmitt-trigger inverter
Rev. 01 — 20 July 2005
Product data sheet
1. General description
The 74AUP1G14 is a high-performance, low-power, low-voltage, Si-gate CMOS device,
superior to most advanced CMOS compatible TTL families.
This device ensures a very low static and dynamic power consumption across the entire
V_CC range from 0.8 V to 3.6 V.
This device is fully specified for partial Power-down applications using I_OFF.
The I_OFF circuitry disables the output, preventing the damaging backflow current through
the device when it is powered down.
The 74AUP1G14 provides a single inverting Schmitt-trigger which accepts standard input
signals. It is capable of transforming slowly changing input signals into sharply defined,
jitter-free output signals.
The inputs switch at different points for positive and negative-going signals. The difference
between the positive voltage V_(th)LH and the negative voltage V_(th)HL is defined as the input
hysteresis voltage V_hys.
2. Features
s Wide supply voltage range from 0.8 V to 3.6 V
s High noise immunity
s ESD protection:
x HBM JESD22-A114-C exceeds 2000 V
x MM JESD22-A115-A exceeds 200 V
x CDM JESD22-C101-C exceeds 1000 V
s Low static power consumption; I_CC = 0.9 µA (maximum)
s Latch-up performance exceeds 100 mA per JESD 78 Class II
s Inputs accept voltages up to 3.6 V
s Low noise overshoot and undershoot < 10 % of V_CC
s I_OFF circuitry provides partial Power-down mode operation
s Multiple package options
s Specified from −40 °C to +85 °C and −40 °C to +125 °C
3. Applications
s Wave and pulse shaper
s Astable multivibrator
s Monostable multivibrator