74AHC_AHCT595_15 Datasheet, PDF (1/22 Pages) NXP Semiconductors – 74AHC_AHCT595_15

74AHC595; 74AHCT595
8-bit serial-in/serial-out or parallel-out shift register with
output latches
Rev. 5 — 4 July 2012
Product data sheet
1. General description
The 74AHC595; 74AHCT595 are high-speed Si-gate CMOS devices and are pin
compatible with Low-power Schottky TTL (LSTTL). They are specified in compliance with
JEDEC standard No. 7A.
The 74AHC595; 74AHCT595 are 8-stage serial shift registers with a storage register and
3-state outputs. The registers have separate clocks.
Data is shifted on the positive-going transitions of the shift register clock input (SHCP).
The data in each register is transferred to the storage register on a positive-going
transition of the storage register clock input (STCP). If both clocks are connected together,
the shift register will always be one clock pulse ahead of the storage register.
The shift register has a serial input (DS) and a serial standard output (Q7S) for cascading.
It is also provided with asynchronous reset (active LOW) for all 8 shift register stages. The
storage register has 8 parallel 3-state bus driver outputs. Data in the storage register
appears at the output whenever the output enable input (OE) is LOW.
2. Features and benefits
 Balanced propagation delays
 All inputs have Schmitt-trigger action
 Inputs accept voltages higher than V_CC
 Input levels:
 The 74AHC595 operates with CMOS input levels
 The 74AHCT595 operates with TTL input levels
 ESD protection:
 HBM JESD22-A114F exceeds 2000 V
 MM JESD22-A115-A exceeds 200 V
 CDM JESD22-C101E exceeds 1000 V
 Multiple package options
 Specified from 40 C to +85 C and from 40 C to +125 C
3. Applications
 Serial-to-parallel data conversion
 Remote control holding register