PLA03A-050-R Datasheet, PDF (3/3 Pages) Phihong USA Inc. – 3.0 Watt - Unregulated Wall Plug

PLA03A Characteristics
INPUT:
AC Input Voltage Range
90 to 264VAC
AC Inrush Current
40A max @ 240VAC, 25°C
Input Power Saving
<0.3W max @ 120/240VAC, no load
California Energy Commission Compliant,
Level IV
Efficiency
≥ 59.9%
OUTPUT:
Ripple (1)
250 mVp-p
Over Voltage Protection
5VDC: OVP shall not exceed 15V Max
9VDC: OVP shall not exceed 18V Max
12VDC: OVP shall not exceed 24V Max
Short Circuit Protection
Auto Recovery
ENVIRONMENTAL:
Operation Temperature (Convection)
0°C ~ 40°C
Storage Temperature
-40°C ~ 85°C
Humidity
90% RH Max
Emissions
FCC Class B
EN55022 class B
Note: (1) Measured after 10 minutes with by-pass
capacitors 0.1uf / 10uf at output connector terminal and
oscilloscope set at 20 MHz.
Phihong reserves the right to make changes without
further notice. Please consult Phihong USA and visit
www.phihong.com for the most up-to-date
specifications.
WWW.PHIHONG.COM
Immunity
EN61000-4-2, Level 3
EN61000-4-5, Level 3
General
Leakage Current
≤ 10 uA max
Dielectric Withstand (Hi-pot)
3KVAC, Primary to Secondary
MTBF (Full Load, 25°C)
100K Hrs. min. at max load, 25°C ambient and
120VAC
DC Output Connector
2.1 mm x 5.5 mm Center Positive
AC Input Clip
Fixed US blade
11-11-08