PDA100W-700GD Datasheet, PDF (2/3 Pages) Phihong USA Inc. – 100W Constant Current LED Driver LED Power Supply with 0-10V Dimming

PDA100W Characteristics
Input:
AC Input Voltage Range
108VAC to 304VAC
AC Input Frequency
47~63Hz
Maximum Input Current
≤ 1.26A
Leakage Current
0.75mA maximum at 277VAC Input
Inrush Current
< 80A
OUTPUT:
Power Factor
≥ 0.9
Output Current Ripple
<105mA (p-p)
Efficiency
88% at 120VAC
91% at 277VAC
Turn-on Delay Time
<0.5s maximum at nominal AC Power ON
Environmental:
Temperature
Operation
Non-operation
Case Temperature
Operating Humidity
-40 to +50°C
-40 to +90°C
<85°C
5 to 98%
Dimming Control
0-10VDC
Dimming Grounding
Dim(-) and Vout(-) must never be connected
together to ensure proper operation and isolation
requirements
WWW.PHIHONG.COM
EMC
EN55015/CISPR 15/FCC 47 Part 15/18 Class A
Immunity
IEC61000-4-2
IEC61000-4-3
IEC61000-4-4
IEC61000-4-5
IEC61000-4-6
IEC61000-4-8
IEC61000-4-11
IEC61000-3-2 Class C
Input Over Current Protection
The input power line will be fused with a 6.3A fuse
Short-Circuit Protection
The PSU will withstand a short circuit across the
outputs without damage
Over Temperature Protection
The load will drop by 50% automatically if the case
temperature exceeds the recommended limit
Dielectric Withstand (Hi-pot) Test
Primary to secondary: 4242VDC for 1 minute, 5.5mA
Insulation Resistance
Primary to secondary: >5M Ohm 500VDC, 1 Minute
Wire Connections
Position
Terminal
Color
Line
Black
Neutral
White
Ground Green/Yellow
Vout+
Red
Vout-
Blue
20V
Yellow
Dim+
Violet
Dim-
Grey
Specification
AWG18 Solid Wire
AWG18 Solid Wire
AWG18 Solid Wire
AWG18 Solid Wire
AWG18 Solid Wire
AWG22 Solid Wire
AWG22 Solid Wire
AWG22 Solid Wire
Length
390mm
390mm
390mm
390mm
390mm
390mm
390mm
390mm
Warranty
5 Years