PDA100B-48VG Datasheet, PDF (2/3 Pages) Phihong USA Inc. – 100W Constant Voltage LED Driver PDA100B LED Power Supply Non-Dimming

PDA100B Characteristics
INPUT:
AC Input Voltage Rating
90VAC to 304VAC
Nominal AC Input Voltage
100 to 277VAC
AC Input Frequency
47~63Hz
Maximum Input Current
≤ 1.35A
Leakage Current
0.75mA maximum
Power Factor
≥ 0.9
THD
< 20%
OUTPUT:
Output Voltage Ripple
≤1% (p-p)
Efficiency
Model
PDA100B-24VG
PDA100B-48VG
Typical Efficiency
88%
90%
Environmental:
Temperature
Operation Tc
Non-operation
Operating Humidity
-40 to 90°C
-40 to +85°C
10 to 95%
WWW.PHIHONG.COM
EMC
FCC Part 15 Class A
Immunity
IEC61000-4-2
IEC61000-4-3
IEC61000-4-4
IEC61000-4-5
IEC61000-4-6
IEC61000-4-8
IEC61000-4-11
Dielectric Withstand (Hi-pot) Test
Primary to secondary: 3000VAC/4242VDC for 1 minute,
10mA
Insulation Resistance
Primary to secondary: >5M Ohm 500VDC, 1 Minute
FEATURES:
Short-Circuit Protection
The Driver will withstand a short circuit across the
outputs without damage.
Input Over Current Protection
The input power line will be fused with a 3.15A/300VAC
fuse
Output Over-voltage Protection
Latch
Over Temperature Protection
Latch
Output Current Protection
Over current protection trigger level be
within 2.2A~3.12A
Input / Output Connections
Position
Terminal
Color
Specification
Black
AWG18 Solid Wire
Input
White
AWG18 Solid Wire
Green/Yellow AWG18 Solid Wire
Output
Red
Blue
AWG18 Solid Wire
AWG18 Solid Wire
Length
330mm
330mm
330mm
330mm
330mm
Warranty
5 Years