PDA028A-1A4B-R Datasheet, PDF (2/3 Pages) Phihong USA Inc. – 28W LED Driver with 1400mA Constant Current LED Power Supply for Residential Lighting

PDA028A Characteristics
INPUT:
AC Input Voltage
108 to 132VAC
Nominal AC Input Voltage
120VAC
Leakage Current
0.5mA maximum at 110VAC
Maximum Input Current
500mA (RMS) at 108VAC
Inrush Current
<30A at 132VAC, 60Hz
OUTPUT:
Output Power
28W
Efficiency
80% minimum at full load, nominal AC input
Power Factor
≥0.9 at full load, nominal AC input
Turn-on/off Delay Time
0.5ms maximum at nominal AC power on
ENVIRONMENTAL:
Operating Temperature
Storage Temperature
-40 to +40°C
-40 to +85°C
Operating Humidity
Storage Humidity
10 to 95%
05 to 95%
Warranty
3 Years
Ingression Protection
IP66
WWW.PHIHONG.COM
EMC
FCC Part 15 Class B
Immunity
IEC61000-4-2
IEC61000-4-3
IEC61000-4-4
IEC61000-4-5
IEC61000-4-8
IEC61000-4-11
Isolation Test (HI-POT)
Primary to secondary: 2000VAC for 1 minute,
10mA
Insulation Resistance
Primary to secondary: >5M OHM 500VDC, 1
minute
FEATURES:
Input Over Current Protection
The input power line will be fused with a 1A fuse
Short Circuit Protection
The Driver will withstand a short circuit across the
outputs without damage
Output Over Voltage Protection
During no load condition, the over voltage
protection trigger level is <35V.
Lifetime
10K Hours minimum (Tc <80°C)
Input / Output Wires (Solid or Stranded)
Position Terminal Color Specification
Line
Black
AWG18
Neutral
White
AWG18
Vout+
Red
AWG18
Vout-
Black
AWG18