PDA015A-350C Datasheet, PDF (2/2 Pages) Phihong USA Inc. – 15W Constant Current LED Driver Power Supply for Indoor Lighting

PDA015A-350C Characteristics
INPUT:
AC Input Voltage
211 to 264VAC
Nominal AC Input Voltage
220 to 240VAC
Leakage Current
0.5mA maximum
Maximum Input Current
≤0.3A at 230VAC
AC Inrush Current
≤30A at 230VAC, full load
OUTPUT:
Total Output Power
16.8W maximum
Efficiency
77% minimum
Power Factor
≥0.9 at full load, nominal AC input
Ripple
<1A
ENVIRONMENTAL:
Operating Temperature
Storage Temperature
-20 to +50°C
-40 to +85°C
Operating Humidity
Storage Humidity
10 to 95%
05 to 95%
Warranty
3 Years
Lifetime
20K hours minimum
Dimension Diagram Unit:mm
WWW.PHIHONG.COM
EMC
EN55015, FCC 47 Part 18, EN55022 Class B
Immunity
IEC61000-4-2
IEC61000-4-5
IEC61000-3-2 Class C
IEC61000-3-3
Isolation Test
Primary to secondary: 3950VAC for 1 minute,
10mA
Insulation Resistance
Primary to secondary: >5M OHM 500VDC, 1
minute
FEATURES:
Input Current Protection
The input power line is fused with a 1.6A fuse
Short Circuit
Driver will withstand short circuit across outputs
without damage
Output Overvoltage Protection
Output is protected (latched) from over voltage
Open Circuit Protection
If circuit is open, output will not be damaged at
nominal AC input conditions
Input / Output Connection
2-pin terminal block
Input / Output Wires (Solid or Stranded)
Position Terminal Color Specification
Line
Brown
AWG16~18
Neutral
Blue
AWG16~18
Vout+
Red
AWG16~18
Vout-
Black
AWG16~18
Ingression Protection
IP20