PDA010A-700C Datasheet, PDF (2/3 Pages) Phihong USA Inc. – 10W LED Driver with 700mA Constant Current LED Power Supply for Indoor Lighting

PDA010A Characteristics
INPUT:
AC Input Voltage
211 to 264VAC
Nominal AC Input Voltage
230 to 240VAC
Leakage Current
0.5mA maximum at 230VAC
Maximum Input Current
≤70mA at 230VAC
OUTPUT:
Total Output Power
9W absolute maximum
Efficiency
70% minimum at full load, nominal AC input
Power Factor
≥0.9 at full load, nominal AC input
Ripple
<1A
Turn-on/off Delay Time
0.5ms maximum at nominal AC power on
ENVIRONMENTAL:
Operating Temperature
Storage Temperature
-20 to +50°C
-40 to +85°C
Operating Humidity
Storage Humidity
10 to 95%
05 to 95%
Warranty
3 Years
Ingression Protection
IP20
WWW.PHIHONG.COM
EMC
EN55015, FCC 47 Part 18, EN55022 Class B
Immunity
IEC61000-4-2
IEC61000-4-5
IEC61000-3-2 Class C
IEC61000-3-3
Isolation Test (HI-POT)
Primary to secondary: 3750VAC for 1 minute,
10mA
Insulation Resistance
Primary to secondary: >5M OHM 500VDC, 1
minute
FEATURES:
Input Over Current Protection
The input power line will be fused with a 1.6A fuse
Short Circuit Protection
The Driver will withstand a short circuit across the
outputs without damage
Output Over Voltage Protection
The output shall be protected (latched) from over
voltage
Open Circuit Protection
Once the circuit is opened, the output voltage should
be less than 16V at nominal AC input conditions.
Lifetime
20K Hours minimum
Input / Output Connection
2-pin terminal block
Input / Output Wires (Solid or Stranded)
Position Terminal Color Specification
Line
Brown
AWG10~24
Neutral
Blue
AWG10~24
Vout+
Red
AWG10~24
Vout-
Black
AWG10~24