PDA006A-700C Datasheet, PDF (2/3 Pages) Phihong USA Inc. – 6W LED Driver with 700mA Constant Current PDA006A LED Power Supply

PDA006A-700C Characteristics
INPUT:
AC Input Voltage
211 to 264VAC
Nominal AC Input Voltage
220 to 240VAC
Leakage Current
<0.5mA at 230VAC and maximum load
Maximum Input Current
≤100mA at full load, 211VAC
AC Inrush Current
≤20A at 230VAC and maximum load
OUTPUT:
Total Output Power
5.6W maximum
Efficiency
≥70% at nominal input voltage, full load
Power Factor
≥0.7 at nominal input voltage, full load
Ripple
<1A
Turn-on/Turn off delay Time
0.5 seconds maximum
ENVIRONMENTAL:
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
-20 to +50°C
-20 to +70°C
10 to 95%
05 to 95%
Warranty
3 Years
Lifespan
20K Hours minimum at max load and ambient 50°C
WWW.PHIHONG.COM
EMC
EN55015, FCC 47 Part 18, EN55022 Class B
Immunity
EN61000-4-2
EN61000-4-5
EN61000-3-2
EN61000-3-3
Class C
Isolation Test
Primary to Secondary: 3750VAC, <5mA, 1 minute
Insulation Resistance
Primary to Secondary: 500VDC, >5M ohm, 1
minute
FEATURES:
Input Current Protection
The input power line will be fused with a
1W/3.9Ohm fuse resistor
Short Circuit
Auto restart without damage
Output Overvoltage Protection
Output should not exceed 12V, auto shut down
Open Circuit Protection
Once the circuit is opened, the output voltage should
be less than 12V at nominal AC input conditions
Input / Output Connection
2-pin terminal block
Position Terminal Color
Line
Neutral
Vout+
Vout-
Brown
Blue
Red
Black
Input / Output Wires
16~18AWG solid or stranded wires
Ingression Protection
IP20; plastic housing
Mounting Provision
Screw mounting, accessible without opening unit