English
Language : 

PSA60-105 Datasheet, PDF (1/2 Pages) Phihong USA Inc. – Switching Power Supply
WWW.PHIHONG.COM
80W* Universal Input Series
PSA60 Series Switching Power Supply
*80W rated at 20CFM air flow cooling
Features
z High efficiency
z Over voltage protection
C
US
z Built-in EMI filter
z Short circuit protection
Applications
z Disk/Tape drive systems
z Peripheral equipment
z Microprocessor systems
z Mixed logic applications
Safety Compliance
z cUL 1950
z CSA 22.2 234
z TUV EN60950
z CE (Low Voltage Directive)
Mechanical Characteristics
Dimensions: z Length: 127mm (5.0in)
z Width: 76.2mm (3.0in)
Output Specifications
z Height: 40mm (1.58in)
z Weight: 0.36kgs (0.79Ibs)
Model
DC Output
Load
Ripple Total Output
Voltage
Min.
PSA60-105
+5V
0.0A
PSA60-112
+12V
0.0A
PSA60-115
+15V
0.0A
PSA60-124
+24V
0.0A
PSA60-148
+48V
0.0A
PSA60-202
+5V (V1)
+24V (V2)
1.0A
0.1A
PSA60-203
+5V (V1)
+12V (V2)
1.0A
0.3A
+5V (V1)
1.0A
PSA60-301
+12V (V2)
0.3A
-12V (V3)
0.0A
+5V (V1)
1.0A
PSA60-303
+12V (V2)
0.3A
-5V (V3)
0.0A
+5V (V1)
1.0A
PSA60-304
+15V (V2)
0.3A
-15V (V31)
0.0A
Max.
10A
5.0A
4.0A
2.5A
1.2A
6.0A
1.3A
4.0A
3.5A
6.0A
2.2A
0.3A
6.0A
2.2A
0.5A
6.0A
1.5A
0.5A
@20CFM P-P Regulation Pins
10A
50mV
6.6A 120mV
5.3A 150mV
3.3A 240mV
1.4A 480mV
8.0A
50mV
1.8A 240mV
6.0A
50mV
4.5A 120mV
8.0A
50mV
3.0A 120mV
0.5A 120mV
8.0A
50mV
3.0A 120mV
0.5A
50mV
8.0A
50mV
2.0A 150mV
0.5A 150mV
+2% 1,2,3
+2% 1,2,3
+2% 1,2,3
+2% 1,2,3
+2% 1,2,3
+2% 2,3
+5%
1
+2% 2,3
+5%
1
+2% 2,3
+5%
1
+5%
6
+2% 2,3
+5%
1
+5%
6
+2% 2,3
+5%
1
+5%
6
(1) Total output power must not exceed 60W at convection cooling and 80W at 20CFM air flow cooling.
(2) Peak output current lasting less than 30 seconds with duty cycle less than 10%. During peak loading, peak total power must not exceed 80W.
(3) Ripple & noise is measured at 20MHz bandwidth limit by use a 12 inch twisted wire terminated with a 10 f capacitor in parallel 0.1 f ceramic capacitor.
Phihong is not responsible for any errors or changes. Please contact the factory and visit www.phihong.com for the most up-to-date specifications.