PSA075-050_14 Datasheet, PDF (1/2 Pages) Phihong USA Inc. – 75 Watt Low Cost Open Frame Power Supply

WWW.PHIHONG.COM
75 Watt Low Cost Open Frame Power Supply
PSA075 Single Output Series
Features
 3” x 5”
 Low Profile fits 1U Height Requirement
 Class B Conducted EMI
Applications
 Tape/Disk Drive Systems
 POS Terminals
 Internet Servers
Safety Approvals
 CE (Low Voltage Directive)
 TUV
Mechanical Characteristics
 Length: 127mm (5in)
 Width: 76.2mm (3in)
Output Specifications
 Low Cost
 Zero Minimum load
 Over Voltage and Short Circuit Protection
 Peripherals
 Routers
 Networking
 cUL/US
 Height: 33.1mm (1.3in)
 Weight: 220g (7.76oz)
Model
PSA075-050
PSA075-120
PSA075-240
DC Output
Voltage
+5V
+12V
+24V
Load
Min. Max. ⁽¹⁾
0A
11A
0A
6.25A
0A
3.125
Ripple ⁽²⁾
P-P (max.)
50mV
120mV
240mV
Regulation
Line Load
±1% ±3%
±1% ±2%
±1% ±2%
Max
Power ⁽³⁾
55W
75W
75W
(1) CFM forced air required; with convection cooling max load is 8A for 5V model, 5A for 12V, and 2.5A for 24V models.
(2) Measured by using a 12 inch twisted pair terminated with a 10uF capacitor and 0.1uF ceramic capacitor in parallel.
(3) CFM forced air required; with convection cooling power is 40W for 5V model and 60W for 12V and 24V models.
Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the
most up-to-date specifications and contact information.
Revised 11/21/2011