English
Language : 

PSA-4005 Datasheet, PDF (1/2 Pages) Phihong USA Inc. – Switching Power Supply
40W Universal Input Series
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
PSA-4031 Series Switching Power Supply
DVE
LV D
Features
• High efficiency
• Built-in EMI filter
• 100% Burn-in for 24hrs.
• Over voltage protection
• Short circuit protection
• UL/CSA/VDE approval
Applications
• Disk drive systems
• Peripheral equipment
Safety Compliance
• Test equipment
• Microprocessor based systems
• UL 1950
• CSA 22.2 1402C Level 3
• VDE 0806
• EN 60950
Mechanical Characteristics
Dimensions: • Length: 127mm (5.0in)
• Width: 76.2mm (3.0in)
• Height: 30mm (1.2in)
• Weight: 0.27kgs (0.6Ibs)
Output Specifications
Model
DC Output
Load
Ripple
Total
Voltage
Min. Max. @20CFM Peak
P-P (2) Tolerance
PSA-4005
+5V V1 0.0A 6.0A 8.0A 8.0A
100mV
+ 2%
PSA-4012 +12V V1 0.0A 3.0A 4.0A 4.0A
120mV
+ 2%
PSA-4015 +15V V1 0.0A 2.5A 3.3A 3.3A
150mV
+ 5%
PSA-4024 +24V V1 0.0A 1.5A 2.0A 2.0A
240mV
+ 2%
+5.1V V1 0.5A 3.0A 5.0A 7.0A
50mV
+ 2%
PSA-4031 +12V V2 0.2A 2.0A 2.0A 3.0A
120mV
+ 5%
-12V V3 0.0A 0.5A 0.5A 0.5A
120mV
+ 5%
+5.1V V1 0.5A 4.0A 6.0A 7.0A
50mV
+ 2%
PSA-4032 +12V V2 0.0A 0.5A 0.5A 0.5A
120mV
+ 5%
-12V V3 0.0A 0.5A 0.5A 0.5A
120mV
+ 5%
+5.1V V1 0.5A 3.0A 5.0A 7.0A
50mV
+ 2%
PSA-4033 +12V V2 0.2A 2.0A 2.0A 3.0A
120mV
+ 5%
-5V V3 0.0A 0.5A 0.5A 0.5A
50mV
+ 5%
+5.1V V1 0.5A 3.0A 5.0A 7.0A
50mV
+ 2%
PSA-4034 +15V V2 0.2A 2.0A 2.0A 3.0A
150mV
+ 5%
-15V V3 0.0A 0.5A 0.5A 0.5A
150mV
+ 5%
PSA-4035
+5.1V V1 0.5A 3.0A
+24V V2 0.3A 1.0A
5.0A
1.0A
7.0A
2.0A
50mV
240mV
+ 2%
+ 5%
(1) Peak output current lasting less than 30 seconds with duty cycle less than 10%. During peak loading, peak
total power must not exceed 60W.
(2) Ripple & noise is measured at 20MHz bandwidth limit by using a 10 inch twisted wire terminated with a 10µf
capacitor in parallel 0.1µf ceramic capacitor, it is also necessary to connect the primar y and secondary ground
holes together by jumper wire or by mounting screws to metal case under evaluation.
(3) Total output power must not exceed 40W at convection cooling and 60W at 20CFM air flow condition.