PRBG351 Datasheet, PDF (1/2 Pages) MIC GROUP RECTIFIERS – PRESS FIT AUTOMOTIVE RECTIFIER（BOSCH）

PRESS FIT AUTOMOTIVE RECT（IFIER
PRBG351 THRU PRBG356
VOLTAGE RANGE
CURRENT
100 to 600 Volts
35.0 Amperes
TECHNICAL SPECIFICATION：
FEATURES
• Low Leakage
• Low forward voltage drop
• High current capability
• High forward surge current capacity
• Glass passivated chip
MECHANICAL DATA
• Technology: Cell with Vacuum soldered
• Case: Copper case
• Polarity: As marked of case bottom
• Lead: Plated lead , solderable per MIL-STD-202E
method 208C
• Mounting: Press Fit
• Weight: 0.28 ounces, 7.86 grams
BC-3
Lead Negative
0.049± 0.002
(Φ1.25±0.50)
BC-1
Lead Positive
0.049± 0.002
(Φ1.25±0.50)
Φ12.30±0.15
Φ8.30±0.15
1.22± 0.02
(31.00± 0.50)
ΦMAX11.80
Φ8.30±0.15
1.22± 0.02
(31.00± 0.50)
0.44± 0.02
(Φ11.2±0.50)
0.50-0.505
(Φ12.78-12.82)
0.44± 0.02
(Φ11.2±0.50)
0.50-0.505
(Φ12.78-12.82)
0.42± 0.008
(Φ10.60±0.20)
Φ9.50±0.20
Epoxy
Epoxy
Dimensions in inches and (millimeters)
Φ9.50±0.20
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25℃ ambient temperature unless otherwise specified
• Single Phase, half wave, 60HZ, resistive or inductive load
• For capacitive load derate current by 20%
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current,
At Tc=105℃
Peak Forward Surge Current
3.3mS single half sine wave superimposed on
Rated load (JEDEC method)
Rating for fusing (t＜8.3ms)
Maximum instantaneous Forward Voltage at 100A
Maximum DC Reverse Current at Rated TA=25℃
DC Blocking Voltage
TA=100℃
SYMBOLS
V_RRM
V_RMS
V_DC
I_(AV)
I_FSM
I²t
V_F
I_R
Typical Thermal Resistance
R_θJC
Operating and Storage Temperature Range
T_J,T_STG
Notes:
1. Enough heatsink must be considered in application.
PRBG351
100
70
100
PRBG352
200
140
200
PRBG353
300
210
300
PRBG354
400
280
400
35
500
1038
1.08
5.0
450
0.8
(-65 to +175)
PRBG356
600
420
600
UNIT
Volts
Volts
Volts
Amps
Amps
A²S
Volts
UA
℃/W
℃
Web Site: _{WWW.PS-PFS.COM}