MB3505 Datasheet, PDF (1/2 Pages) Rectron Semiconductor – SINGLE-PHASE SILICON BRIDGE RECTIFIER (VOLTAGE RANGE 50 to 1000 Volts CURRENT 35 Amperes)

MASTER INSTRUMENT CORPORATION
SINGLE-PHASE BRIDGE RECTIFIER
MB3505 THRU MB3510
KBPC35005 THRU KBPC3510
VOLTAGE RANGE 50 to 1000 Volts
CURRENT
35 Amperes
FEATURES
l Low cost
l This series is UL recognized under component
index, file number E127707
l High forward surge current capability
l Ideal for printed circuit board
l High isolation voltage from case to leads
l High temperature soldering guaranteed:
260 ^oC/10 second, at 5 lbs. (2.3kg) tension.
MECHANICAL DATA
l Case: Molded plastic body
l Terminal: Plated 0.25” (6.35mm) lug.
l Polarity: Polarity symbols marked on case
l Mounting: Thru hole for #10 screw, 20 in.-lbs torque max.
l Weight:1.02 ounce, 29 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%.
MB-35
1.14( 28.9)
1.12( 28.4)
0.666( 16.9)
0.626( 15.9)
AC
1.14( 28.9) 0.728( 18.5)
1.12( 28.4) 0.688( 17.5)
-
+
0.666( 16.9)
0.626( 15.9)
AC
EXOPY CASE
0.09( ^{2.3) DIA}
0.570( 14.5)
0.530( 13.5)
0.205( 5.2)
0.197( 5.0)
DIA
0.46( 11.7)
0.41( 10.5)
0.472( 12.0)
0.374( 9.5)
0.033( 0.84)
0.028( 0.71)
0.252( 6.4)
0.248( 6.3)
0.252( 6.4)
0.248( 6.3)
Dimensions in inches and (millimeters)
SYMBOLS
MB3505
KBPC35005
MB351 MB352 MB354 MB356
KBPC3501 KBPC3502 KBPC3504 KBPC3506
MB358
KBPC3508
MB3510
KBPC3510
UNITS
Maximum Repetitive Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC Blocking Voltage
VDC
Maximum Average Forward
Rectified Output Current, at TC=50℃(Note1,2)
I(AV)
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rated load (JEDEC
IFSM
Method)
Rating for Fusing(t<8.3ms)
I²T
Maximum Instantaneous Forward Voltage at 17.5A
VF
Maximum DC Reverse Current at
rated DC blocking voltage
TA=25℃
TA=125℃
IR
Isolation Voltage from case to lugs
VISO
Typical Thermal Resistance (Note 1,2)
RθJC
Operating Temperature Range
TJ
Storage Temperature Range
TSTG
50
100
200
400
600
800
1000
Volts
35
Amps
400
664
1.1
10
1.0
2500
2.0
-55 to +150
-55 to +150
Amps
A²S
Volts
µAmps
mAmps
VAC
℃/W
℃
℃
NOTES:
1. Unit mounted on 9”×3.5”×4.6”(23×9×11.8mm) Al. finned plate.
2. Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #10 screw.
Web Site: WWW.PS-PFS.COM
1/2