MB05F Datasheet, PDF (1/2 Pages) PACELEADER INDUSTRIAL – Miniature Glass Passivated Single-Phase Surface Mount Flat Bridge Rectifier

Low Profile Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifier
MB05F ^thru MB10F ^{VOLTAGE - 50 TO 1000 VOLTS CURRENT - 0.5 AMPERES}
μ
FEATURES
● _{Low profile space}
● _{Ideal for automated placement}
● _{Glass passivated chip junction}
● _{Low forward voltage drop}
● _{Low leakage current}
● _{High forward surge capability}
● _{High temperature soldering：}
260℃/10 seconds at terminals
● _{Component in accordance to}
RoHS 2002/95/1 and WEEE 2002/96/EC
MBF
MECHANICAL DATA
● _{Case: MBF Molded plastic}
over glass passivated chip
● _{Terminals: Solder plated, solderable per}
J-STD-002B and JESD22-B102D
● _{Polarity: Polarity symbols marked on body}
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
(T_A = 25 _°C unless otherwise noted)
Symbol MB05F MB1F MB2F MB4F MB6F MB8F MB10F UNIT
Maximum repetitive peak reverse voltage
V_RRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage
V_DC 50 100 200 400 600 800 1000 V
Maximum average forward output rectified
current at T_A=30℃ -on glass-epoxy P.C.B(NOTE 1) IF(AV)
0.5
A
-on aluminum substrate(NOTE 2)
0.8
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load(JEDEC Method)
I_FSM
35
A
Maximum instantaneous forwad voltage drop
per leg at 0.4A
V_F
Maximum DC reverse current at TA = 25 ℃
rated DC blocking voltage per leg T_A = 125℃
I_R
1
V
5.0
100
μA
Typical junction capacitance per leg at 4.0 V ,1MHz
C_J
13
pF
(NOTE 1) R_θJA
85
Thermal resistance per leg
(NOTE 2) R_θJA
70
(NOTE 1) R_θJL
20
Operating junction and storage temperature range
T_J, T_STG
–55 to +150
NOTE1:On glass epoxy P.C.B. mounted on 0.05×0.05″(1.3×1.3mm) pads
NOTE2:On aluminum substrate P.C.B. with an area of 0.8″×0.8″(20×20mm) mounted
on 0.05×0.05″(1.3×1.3mm) solder pad
℃/ W
℃
Web Site: WWW.PS-PFS.COM