1N4933 Datasheet, PDF (1/2 Pages) Motorola, Inc – FAST RECOVERY RECTIFIERS 50-600 VOLTS 1.0 AMPERE

1N4933 THRU 1N4937
FAST RECOVER RECTIFIER
VOLTAGE RANGE
CURRENT
50 to 600 Volts
1.0 Ampere
FEATURES
• Low coat construction
• Fast switching for high efficency.
• Low reverse leakage
• High forward surge current capability
• High temperature soldering guaranteed:
260℃/10 secods/.375”(9.5mm)lead length at 5 lbs(2.3kg) tension
MECHANICAL DATA
• Case: Transfer molded plastic
• Epoxy: UL94V-O rate flame retardant
• Polarity: Color band denotes cathode end
• Lead: Plated axial lead, solderable per MIL-STD-202E method 208C
• Mounting position: Any
• Weight: 0.012 ounce, 0.33 grams
1.0(25.4)
MIN.
.205(5.2)
.160(4.2)
1.0(25.4)
MIN.
DO-41
.034(0.9)
.028(0.7)
DIA.
.107(2.7) _DIA.
.080(2.0)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25^OC ambient temperature unless otherwise specified
• Single Phase, half wave, 60Hz, resistive or inductive load
• For capacitive load derate current by 20%
SYMBOLS 1N4933 1N4934 1N4935 1N4936 1N4937 UNITS
Maximum Repetitive Peak Reverse Voltage
V_RRM
50
100
200
400
600
Volts
Maximum RMS Voltage
V_RMS
35
70
140
280
420
Volts
Maximum DC Blocking Voltage
V_DC
50
100
200
400
600
Volts
Maximum Average Forward Rectified Current
0.375”(9.5mm) lead length at TA= 75℃
I_(AV)
1.0
Amp
Peak Forward Surge Current
8.3mS single half sine wave superimposed on
I_FSM
30
rated load (JEDEC method)
Amps
Maximum Instantaneous Forward Voltage @ 1.0A
V_F
1.2
Volts
Maximum DC Reverse Current at Rated
DC Blocking Voltage
TA = 25℃
TA = 100℃
I_R
5.0
100
µA
Maximum Reverse Recovery Time (Note 3) TJ=25℃
trr
200
ns
Maximum Reverse Recovery Current (NOTE 3)
I_RM(REC)
2.0
Typical Junction Capacitance (Note 1)
C_J
15
Amps
pF
Typical Thermal Resistance (Note 2)
R_θJA
50
℃/W
Operating Junction Temperature Range
T_J
(-55 to +150)
℃
Storage Temperature Range
T_STG
(-55 to +150)
℃
Notes:
1.Measured at 1.0MHz and Applied Reverse Voltage of 4.0Volits.
2 Thermal Resistance from junction to Ambient at .375”(9.5mm)lead length, P.C.board mounted.
3.Reverse Recovery Test Conditions:If=1.0A,Vr=30V,di/ dt=50A/us,Irr=10% Irr=10% Irm for the measurement of trr.
Web Site: _{WWW.PS-PFS.COM}