ULPO_15 Datasheet, PDF (1/7 Pages) PETERMANN-TECHNIK – Excellent long time reliability

PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13 ∙ D-86899 ∙ Landsberg am Lech
Tel: [phone] ∙ Fax: [phone]
[e-mail] ∙ www.petermann-technik.com
ULTRA-LOW POWER OSCILLATOR 1-26MHz
SERIES „ULPO“
FEATURES
+ Low Power High Precision Oscillator for Low Cost
+ Excellent long time reliability
+ Ultra-small 1.5 mm x 0.8 mm package
+ 1 to 26 MHz with 6 decimal places of accuracy
+ Ultra low power consumption of 150 µA at 6.144 MHz
+ Operating temperature from -40°C to 85°C
+ RoHS and REACH compliant, Pb-free, Halogen-free and Antimony-
free / MSL1@260°
DESCRIPTION AND APPLICATIONS
The ULPO is the industry’s lowest power MHz oscillator. This device is
based on advanced analog CMOS designs. It delivers <0.28 mW of active
power consumption at 6.144 MHz output frequency in addition to the ultra
-small 1.5 mm x 0.8 mm package and wide frequency range. The combi-
nation of lowest power, smallest package and flexible output frequency
makes it ideal for power sensitive and space constrained applications
including:
+ Smart Phones
+ Tablets
+ Ultra-Small Notebook PC
+ Battery powered devices
+ Wearables
+ IoT devices
+ GPS
+ Smart Metering
GENERAL DATA⁽¹⁾
PARAMETER AND CONDITIONS
FREQUENCY RANGE
Output Frequency Range
FREQUENCY STABILITY AND AGING
Initial Tolerance
SYMBOL
MIN.
F
1
F_tol
-10
Frequency Stability
F_stab
-100
First Year Aging
F_1 year
-3
OPERATING TEMPERATURE RANGE
Operating Temperature Range
T_use
-20
-40
Storage Temperature Range
T_stor
-55
SUPPLY VOLTAGE AND CURRENT CONSUMPTION
Supply Voltage
VDD
1.62
Current Consumption ⁽²⁾
IDD
-
-
-
Standby Current
LVCMOS OUTPUT CHARACTERISTICS
Duty Cycle
Rise/ Fall Time
I_std
-
DC
45
T_r, T_f
-
Output High Voltage
Output Low Voltage
INPUT CHARACTERISTICS
Input High Voltage
Input Low Voltage
Input Slew Rate
Input Pull-down Impedence
Input Capacitance
VOH
90%
VOL
VIH
75%
VIL
-
In-slew
10
Z_in
200
3
C_in
-
TYP.
-
-
-
–
–
–
1.8
60
-
-
0.9
-
-
-
-
-
-
-
-
MAX.
26
+10
+100
+3
+70
+85
+125
1.98
-
150
270
2
55
8
-
10%
25%
7
UNIT CONDITION
MHz
PPM
PPM
PPM
Frequency offset at 25°C
Inclusive of initial tolerance, and variations over operating
temperature, rated power supply voltage and output load.
Contact PETERMANN-TECHNIK for ±25 or ±50 ppm over –20
to 70°C
At 25°C
°C Extended Commercial
°C Industrial
°C Storage
V
f = 3.072 MHz, No load
µA f = 6.144 MHz, No load
µA f = 6.144 MHz, 10pF load
µA ST pin = HIGH, Output is weakly pulled down
%
ns 20% - 80%. Contact Petermann-Technik for other program-
mable rise/fall options
VDD IOH = -0.5 mA
VDD IOL = 0.5 mA
VDD
VDD
V/µs
kΩ Active mode (ST pin = LOW)
MΩ Standby mode (ST pin = HIGH)
pF
CRYSTALS ∙ OSCILLATORS ∙ CERAMIC RESONATORS ∙ CERAMIC FILTERS ∙ SAW COMPONENTS
PAGE 1 OF 7 I SPEC 01 I REV.00 I OCTOBER 2015