TC18 Datasheet, PDF (1/2 Pages) PETERMANN-TECHNIK – HIGH RELIABILITY FOR LOW COST FREQUENCY STABILITY TO +-1.0 PPM

FEATURES
- HIGH RELIABILITY FOR LOW COST
- FREQUENCY STABILITY TO +-1.0 PPM
- LOW PACKAGE HEIGHT OF 4.7 MM MAX.
- EXTENDED TEMPERATURE RANGE TO -40/+85°C
PETERMANN
TECHNIK
Time & Frequency Components
SERIES
TC18
PACKAGE
14 PIN DIP
FREQUENCY RANGE
1.0 ~ 40.0 MHz
FREQUENCY ACCURACY
+-0.1 PPM max.
VS. AGING
+-1 PPM per year max.
FREQUENCY STABILITY
VS. LOAD
VS. SUPPLY VOLTAGE
+-0.1 PPM / load changement of +-10%
+-0.2 PPM / supply voltage changement of +-5 %
VS. TEMPERATURE
see table 1
OPERATING TEMPERATURE RANGE
0/+50°C ~ -40/+85°C
STORAGE TEMPERATURE RANGE
-40/+100°C
SUPPLY VOLTAGE
+5.0 VDC +-5%
FREQUENCY CONTROL RANGE
+-7.0 PPM min. per internal trimmer
10 Hz
-70 dBc/Hz
100 Hz
-100 dBc/Hz
PHASE NOISE
1 kHz
-130 dBc/Hz
10 kHz
-140 dBc/Hz
100 kHz
-145 dBc/Hz
OUTPUT SIGNAL AND LOAD CHARACTERISTICS
see table 2
OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION
TABLE 1 - FREQUENCY STABILITY VS. TEMPERATURE
CODE
A
B
C
D
E
FREQUENCY STABILITY VS. TEMPERATURE
+-1.0 PPM
+-1.5 PPM
+-2.0 PPM
+-3.0 PPM
+-5.0 PPM
TEMPERATURE RANGE
0/+50°C
0/+70°C
-20/+70°C
-30/+75°C
-40/+85°C
TABLE 2 - OUTPUT WAVEFORM AND LOAD CHARACTERISTICS
OUTPUT _{OUTPUT TYPE}
WAVEFORM
CODE
FREQUENCY RANGE
CLIPPED
SINE WAVE
0
8.000 ~ 40.000 MHz
TTL
1
1.000 ~ 40.000 MHz
HCMOS
2
1.000 ~ 40.000 MHz
ACMOS
3
1.000 ~ 40.000 MHz
OSCILLATION STATE
F: FUNDAMENTAL
F: FUNDAMENTAL
F: FUNDAMENTAL
F: FUNDAMENTAL
OUTPUT CHARACTERISTICS
Load: 10 kΩ/10pF
Output level: >1Vp-p
Max. current = 10 mA
Load: 10 low power consumption TTL
"1" level: >+2.4 VDC / "0" level: <+0.2 VDC
Duty Cycle: 40/60% / Tr and Tf: <6ns
Max. current = 20 mA
Load: 10 low power consumption
TTL/HCMOS gates
"1" level: >+4.5 VDC / "0" level: <+0.5 VDC
Duty Cycle: 40/60% / Tr and Tf: <6ns
Max. current = 20 mA
Load: 10 low power consumption
TTL/ACMOS gates
"1" level: >+4.5 VDC / "0" level: <+0.5 VDC
Duty Cycle: 40/60% / Tr and Tf: <6ns
Max. current = 20 mA
PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering
Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: [phone] / 30 53 97
http://www.petermann-technik.de | [e-mail]