OCXO-14_15 Datasheet, PDF (1/3 Pages) PETERMANN-TECHNIK – High reliability for low cost

ISO 9001:2008
PETERMANN-TECHNIK GmbH
Lechwiesenstr. 13
D-86899 Landsberg am Lech
Fon: +49/8191/305395
Fax: [phone]
www.petermann-technik.com
[e-mail]
OCXO-14
FEATURES
Pb-free
RoHS-2 2011/65/EU
compliant
 High reliability for low cost
 Aging of ± 0.001ppm/day in compact package using SC-CUT crystals
 Extended temperature range to -40/+75°C available
 Short warm-up time and excellent retrace behaviour
 Low power consumption and excellent phase noise parameters
 AT-cut and SC-cut based designs
GENERAL DATA
SERIES
OCXO-14
PACKAGE
DIL 14/4
FREQUENCY RANGE
2.0 ~ 100.0 MHz
FREQUENCY ACCURACY
±0.5 ppm (control voltage centered)
VS. AGING
±0.5 ppm max. after first year / ±3 ppm max. after 10 years
FREQUENCY
VS. LOAD
±0.02 ppm / load change of ±10 %
STABILITY
VS. SUPPLY VOLTAGE ±0.02 ppm / supply voltage change of ±5 %
VS. TEMPERATURE
See table 1
SHORT TERM STABILITY
1.0x10E-10/s (10 MHz)
OPERATING TEMPERATURE RANGE
0/+50°C ~ -40/+75°C
STORAGE TEMPERATURE RANGE
-40/+100°C
SUPPLY VOLTAGE
+3.3VDC / +5.0VDC / +12VDC
CURRENT CONSUMPTION
2.0W max. during warm-up / 1.0W max. when static
WARM-UP TIME
±0.5 ppm <3 minutes
FREQUENCY CONTROL RANGE
±0.5 ppm
CONTROL VOLTAGE
0 ~ 3.3 VDC, 0 ~ 5 VDC
SLOPE
POSITIVE
LINEARITY
±10%
10 Hz
-90 dBc/Hz
PHASE NOISE
100 Hz
-120 dBc/Hz
(10MHz)
1 kHz
-145 dBc/Hz
10 kHz
-150 dBc/Hz
OUTPUT SIGNAL AND LOAD CHARACTERISTICS See table 2
OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION
TABLE 1- FREQUENCY STABILITY VS. TEMPERATURE
CODE
A
B
C
FREQUENCY STABILITY VS. TEMPERATURE
±0.1 ppm for AT-CUT
±0.3 ppm for SC-CUT
±0.5 ppm for AT-CUT
TEMPERATURE RANGE
0/+50°C
-20/+70°C
-40/+75°C
CRYSTALS
OSCILLATORS
CERAMIC RESONATORS
Premium Quality by
PETERMANN-TECHNIK
CERAMIC FILTERS
SAW COMPONENTS
Spec.01 • REV.00 • August 2013